Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GEONAUTE WS300
Summary of Contents for GEONAUTE WS300
- Page 3 RESET AA UM-3 1,5V 1,5V UM-3 - Three-line display Resets all the settings to their default values. - Resetting/RESET control Enables easy reading of weather forecasts, indoor tempera- ture, remote temperature and clock calendar. - MODE/SETTING control - °C/°F control Changes the display mode of the clock and alternates between Selects Celsius (°C) or Fahrenheit (°F) degrees.
-
Page 4: Limited Warranty
Congratulations on purchasing the Géonaute WS300. This weather station features a wireless indoor/outdoor thermometer with a sensor, and a clock. The package contains a main unit (the tem- perature station and the clock), and a wireless sensor. Knowing the indoor and outdoor temperatu- res will enable you to bring the right gear along to workouts, and to exercise under optimal condi- tions of comfort and safety. - Page 5 2. Two new LR6-AA 1.5 V batteries are included for use with the sensor. The batteries are not installed in the device. 3. One cross-tip screwdriver for the screws of the sensor (precision model) (not included). 4. The WS300 station, with battery cover open. 5. The sensor, with battery cover open on its table stand 6.
- Page 6 4- Insert the batteries in the station according to the indicated polarities. Close the cover and put the base back. Verify that the station is displaying something. If it is not, check the position of the batteries. RESET RESET AA UM-3 1,5V AA UM-3 1,5V 1,5V UM-3...
- Page 7 Batteries The remote sensor runs on two AA (LR6) 1.5 V batteries. To install them: Installing the batteries in the remote sensor • Unscrew the cover of the battery compartment. • Insert the batteries strictly according to the polarities as indicated in the battery compartment. •...
-
Page 8: Installation
Installation • Mounting the main unit This unit can be mounted on a wall using the screw head hole (K). It can also be placed on a flat surface using the table stand. • Mounting the remote sensor The remote sensor is fitted with a two-screw wall mount that can be screwed onto the wall. It can also be placed on a horizon- tal surface with the built-in table stand. -
Page 9: Navigation System
NAVIGATION SYSTEM The device features 3 display lines for easy reading. Each line has a precise function: • Outdoor temperature • Indoor temperature • time, alarm, calendar. EXPLANATION OF EACH DISPLAY Outdoor temperature (remote sensor) This window displays the temperature in Celsius (°C) or Fahrenheit (°F) degrees as measured by the wireless sensor transmit- ting data to the main unit. - Page 10 Displaying the time, the date and the alarm This device features two different display modes for this window: Each time you press on the MODE button, you switch to the next display in the order indicated above. 1 - Mode: Hour – minute – day 2 - Mode: Date The ALARM ON [ ] icon indicates if the alarms is on.
-
Page 11: Troubleshooting
SPECIFICATIONS – TROUBLESHOOTING TABLE Troubleshooting This troubleshooting table will guide you in solving minor incidents. Use it to analyze any problems you may encounter. Carry out the problem-solving procedures in numerical order Incident Solution 1.Connection lost: the signal sent by the sensor is not being received by the station. - Page 12 REGULATIONS R&TTE May be used in EU countries. Complies with European directive 99/5/EC This device complies with section 15 of the FCC regulation. Operation of this device is subject to the following two conditions: 1 – There is no risk of this device producing harmful interference. 2 - This device must accept any interference received, including interference which may cause malfunctioning.
Need help?
Do you have a question about the WS300 and is the answer not in the manual?
Questions and answers