Download Print this page

JRC NSVS848 Manual

Saw filter

Advertisement

Quick Links

JRC SAW FILTER
Application
458MHz Low Power Transceiver
Electrical Specification: (Table 1)
The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Electrical Specifications
Item
Input and Output Impedance
Nominal Center Frequency (f0)
Insertion Loss
Response Variation
Input and Output VSWR
Out of Band Rejection
(Relative to Through Level)
Maximum Rating: (Table 2)
Table 2. Maximum Ratings
Item
Maximum Input Power
Maximum DC Voltage
Operating Temperature Range
Storage Temperature
Mechanical Specifications: (Fig.2)
Package is designed as small as 3.5x3.5x1.0[mm
Notice:
This part is electrostatic discharge sensitive and may be damaged by improper handling.
Communications Equipment Marketing Department
http://www.jrc.co.jp/jp/product/device/saw/index.html (Japanese)
http://www.jrc.co.jp/eng/product/saw/index.html(English)
NSVS848
457.5~458.5MHz
457.5~458.5MHz
457.5~458.5MHz
436.6MHz
479.4MHz
(Operating Temperature Range: -10~+60ºC)
Rating
+20dBm
7.5V
-10~+60ºC
-20~+70ºC
Communications Equipment Division
10-1, Nishi-Shinjuku 6-chome, Shinjuku-ku,
Tokyo, 160-8328 Japan
Tel. +81 3-3348-3845
Fax. +81 3-3348-3935
Spec.
-
-
458MHz
3.5dB max.
2.5dB
1.5dB max.
1.0dB
2.5 max.
50dB min.
50dB min.
3
] for SMD (Surface Mount Device) type.
NSVS848 Dec. 2004
Typ.
50Ω
2.0
55dB
55dB

Advertisement

loading

Summary of Contents for JRC NSVS848

  • Page 1 NSVS848 Dec. 2004 JRC SAW FILTER NSVS848 Application 458MHz Low Power Transceiver Electrical Specification: (Table 1) The device characteristics are measured in the circuit shown in Fig.1. Table 1. Electrical Specifications Item Spec. Typ. Input and Output Impedance 50Ω Nominal Center Frequency (f0)
  • Page 2 NSVS848 Dec. 2004 50Ω 50Ω Fig.1 Measuring circuit 3.5±0.2 Marking (1) Manufacture’s Mark (2) Lot Number (a) Year (b) Month (0.95) (0.8) *Oct.--- X [5x] Nov.--- Y Dec.--- Z (3) Part number Mark (0.6) Pin no. Connection IN/OUT OUT/IN Fig.2 Package dimensions (in mm) [6x] Φ...
  • Page 3 NSVS848 Dec. 2004 Notice 1. Use this component within operating temperature range. It might not be satisfied with electrical specification without operating temperature range. When it is used less than -10ºC or more than +60ºC, it might be a cause of degradation or destruction of the component.
  • Page 4 NSVS848 Dec. 2004 ‚ ‚ ‚ 50 O *27nH ‚ U 39pF 50 O *27nH ‚ T ‚ ‚ ‚ ‚ 33pF FREQUENCY CHARACTERISTICS *murata LQW18A series Fig.1 Measuring circuit 13.30±0.20 (1.26±0.13) J4Y1 VS971 CH1 : center 458 span 100 CH2 : center 458 span 100 (R0.3)