Related Manuals for Pace ARM-EVAC 200
Summarization of Contents
General Information
Use of this Manual
Provides basic knowledge for operating and maintaining PACE Arm-Evac 250/200 Fume Extraction Systems.
Introduction to Fume Extraction
Details the PACE Arm-Evac 250/200 systems, their technology, and key features for fume extraction.
Environmental Specifications
Lists the operating and storage temperature and humidity ranges for the fume extraction units.
Central Filtration Unit Specifications
Provides detailed specifications for the central filtration unit, including part numbers and power requirements.
Arm-Evac 250 Supplemental Specifications
Outlines additional specifications specific to the Arm-Evac 250 model, such as filter condition monitoring.
Arm-Evac 250/200 Parts Identification
Illustrates and identifies the various parts and components of the Arm-Evac 250 and 200 systems.
Safety and Application Guidelines
Disclaimer of Responsibility
PACE disclaims liability for personal injury or property damage resulting from product misuse or improper maintenance.
Safety Dangers
Highlights critical dangers associated with improper use, flammable substances, and specific chemical reactions.
Safety Warnings
Warns against filter cleaning for reuse and emphasizes the risks of unfiltered air exposure.
Operational Cautions
Advises on correct voltage supply, using genuine filters, and proper filter installation direction.
Filter Cartridge Notes
Explains filter function, clogging, gas media capacity, and fire hazards from flammable vapors.
Installation Procedures
General Installation Guidelines
Provides recommended guidelines for setting up the Arm-Evac 250/200 system with installation flexibility.
Placement and Power Requirements
Details considerations for unit placement, exhaust port, and connecting to the correct power supply.
Filters and Inlet Caps
Instructs on ensuring filters are correctly positioned and covering unused inlet ports.
Accessories and Configurations
Explains how to use collection accessories and discusses various system configurations.
Connecting Flex Arms
Step-by-step instructions for connecting standard and bench-mounted flex arms to the unit.
Connecting Static-Safe Metal Flex Arms
Details the process for attaching static-safe metal flex arms, including permanent and portable mounting.
Operation of Arm-Evac Systems
Arm-Evac 250 Overview
Introduces the Arm-Evac 250's microprocessor-based sensing technology for filter condition monitoring.
Self-Calibration Procedure
Step-by-step guide for performing self-calibration on the Arm-Evac 250 before initial operation or filter changes.
Filter Condition Monitoring
Explains the graphical filter condition display, LED indicators, and actions for insufficient air flow.
Benchtop Controller and RS232C Output
Describes the optional benchtop controller and the RS232C output for ISO 14000 data transfer.
Remote Control Setup and Operation
Instructions for setting up and operating the remote control and benchtop controller connection.
Maintenance and Care
General Maintenance Tips
Provides essential tips for safe operation, including powering off, avoiding moisture, and preventing blockages.
Filter Replacement
Guidance on replacing pre-filters and main filters to ensure system effectiveness and proper airflow.
Fuses and Motor Care
Details fuse location, replacement, and notes on the maintenance-free nature of the motors.
Accessories Cleaning
Recommendations for monthly cleaning of extraction accessories using mild solvents and ensuring they are dry.
Replacement Filters
Replacement Filter Types and Applications
Lists various replacement filters, their descriptions, typical applications, and part numbers.
Need help?
Do you have a question about the ARM-EVAC 200 and is the answer not in the manual?
Questions and answers