JRC NSVS1061 Manual

JRC SAW FILTER
Application
174MHz GPS
Electrical Specification: (Table 1)
The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Electrical Specifications
Parameter
Input and Output Impedance
Nominal Center Frequency (f0)
3dB Bandwidth
Insertion Loss
Response Variation
Group Delay Variation
Out of Band Rejection
Maximum Rating: (Table 2)
Table2. Maximum Ratings
Item
Maximum Input Power
Maximum DC Voltage
Operating Temperature Range
Storage Temperature
Mechanical Specifications:
Package is designed as small as 9.1x4.8x1.3[mm
Notice:
This part is electrostatic discharge sensitive and may be damaged by improper handling.
Communications Equipment Marketing Department
http://www.jrc.co.jp/jp/product/device/saw/index.html (Japanese)
http://www.jrc.co.jp/eng/product/saw/index.html (English)
NSVS1061
163.0~185.0MHz
163.0~185.0MHz
163.0~185.0MHz
149~157MHz
191~199MHz
(Operating Temperature Range: -20~+70ºC)
Rating
+10dBm
7.5V
-20~+70ºC
-30~+80ºC
Communications Equipment Division
10-1,Nishi-Shinjuku 6-chome Shinjuku-ku,
Tokyo. 160-8328 Japan
Tel. +81 3-3348-3845
Fax. +81 3-3348-3935
NSVS1061 Jan. 2005
Spec.
-
-
-
12.0 dB
1.5 dB
150 ns
30 dB
30 dB
3
] for SMD (Surface Mount Device) type.
Typ.
50Ω
174 MHz
22 MHz
10.0 dB
1.0 dB
100 ns
40 dB
30 dB