CMT LP Series Use, Installation And Maintenance Manual

CMT LP Series Use, Installation And Maintenance Manual

Condensing warm air heaters

Advertisement

Quick Links

CONDENSING WARM AIR HEATERS SERIES
fitted with automatic forced draught gas fired or fuel oil fired low NOx burner
MODEL
SERIAL NUMBER
VOLTAGE
MOUNTH/YEAR
COUNTRY OF DESTINATION:
COMPLIES WITH: GAR 2016/426 (EU); DIRECTIVE 2009/125/EC, ECODESIGN-ErP REGULATION (EU) 2016/2281, STEP II°.
THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. IT MUST BE DELIVERED TO THE USER AND MUST ALWAYS FOLLOW THE
APPLIANCE.
USE, INSTALLATION AND
MAINTENANCE MANUAL
L - LO – LE – LEO - LP
HEATING SECTION SERIES LR
ENGLISH TRANSLATION FROM ORIGINAL
11,3x2
ENCLOSURE: COPY OF GAR 2016/426 CERTIFICATE
R e v . 5 d e l 2 2 / 0 7 / 2 0 2 1
This appliance must be installed in
accordance with the national regulations
in force and used only in a sufficiently
ventilated space.
Consult instructions before installation
and use of this appliance.
P a g .
1 | 65

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LP Series and is the answer not in the manual?

Questions and answers

Summarization of Contents

PURPOSE
Symbols used in the manual
Explains the various safety and information symbols used throughout the manual.
GENERAL INFORMATION AND PRECAUTIONS
Liability and Warranty
Details the manufacturer's warranty, liability, and conditions for voiding the warranty.
CONSTRUCTION CHARACTERISTICS
Series L and LO Composition
Describes the components of the "L" and "LO" series warm air heaters.
Models from “80” to “200″ (L Series)
Details L series models 80-200 with specific motor/fan configuration.
Other essential safety requirements
Electrical equipment
Outlines the electrical checks performed on the warm air heaters.
Noise
Mentions noise containment measures and where values are shown.
CONSTRUCTION CHARACTERISTICS
Models "30" and "60" (L/LO Series)
Details L/LO series models 30 and 60 with specific motor/fan setup.
Models “80” to “200″ (L/LO Series)
Details L/LO series models 80-200 with specific motor/fan setup.
CONSTRUCTION CHARACTERISTICS
Models “250” to “600″ (L/LO Series)
Details L/LO series models 250-600 with specific motor/fan setup.
COMPOSITION OF WARM AIR HEATER series "LE" and "LEO" version
Models "30" and "60" (LE/LEO Series)
Details LE/LEO series models 30 and 60 with specific motor/fan setup.
Models from “LE80” to” LE200″ (LE/LEO Series)
Details LE/LEO series models 80-200 with specific motor/fan setup.
INSTRUCTIONS FOR THE USER
INSPECTIONS BEFORE START-UP
Lists essential checks to perform before the initial start-up of the heater.
OTHER INSPECTIONS IN THE HEATING MODE
Details additional inspections required for heating mode operation.
FUNCTION DESCRIPTION
Heating mode operation
Explains the operational sequence and functions in heating mode.
Stop
Describes how to stop the burner and the entire heater.
OPERATION IN VENTILATION MODE BY POSITIONING
Explains how to operate the heater in ventilation-only mode.
INSTALLATION INSTRUCTIONS
Warm Air Heater Location - Distances
Specifies requirements for heater location and safe distances.
Distance of the warm air heater from walls
Refers to regulations for calculating minimum distances from walls and ceilings.
INSTALLATION
Choosing burner
Guidelines for selecting a compatible gas burner.
Burner installation
Step-by-step instructions for installing the burner.
MAINTENANCE
CLEANING THE HEAT EXCHANGER
Instructions for cleaning the heat exchanger to maintain efficiency.

Table of Contents