Advertisement
SETTLER 500 SERIES
SETTLER C500
SETTLER I500
SETTLER RANCH
INSTALLATION
&
OPERATING INSTRUCTIONS
Serial Number of Heater: ____________
Model: ___________________
SETTLER
WOODHEATERS ARE AUSTRALIAN OWNED & MANUFACTURED
BY
SHAMIC SHEETMETAL
(AUST.) PTY. LTD.
PO BOX 8, KILSYTH, VIC. 3136
PH: 03 9737 5300
https://shamic.com
1
Revised: 16/02/2022
Printed: 16/02/2022
Advertisement
Table of Contents
Related Manuals for Coonara SETTLER C500
Summarization of Contents
INSTALLATION AND OPERATION INSTRUCTIONS
General Safety and Warnings
Essential safety guidelines and warnings for heater operation and installation.
FREESTANDING MODEL INSTALLATION
Flue Location and Clearances
Guidance on determining flue position and required clearances for freestanding models.
Floor Protection
Specifies minimum dimensions and thermal resistivity for floor protectors.
INSERT MODEL INSTALLATION
Floor Protection for Insert Models
Details on required floor protection for insert model installations.
Clearances for Insert Models
Specifies clearance requirements for insert models, including mantle and wall clearances.
ZERO CLEARANCE BOX INSTALLATION
Clearances with Zero Clearance Box
Outlines specific clearances for installing the heater with a zero clearance box.
FIREBOX INTERNAL SET UP
Internal Component Installation
Step-by-step guide for installing baffle plate, air tube, liners, and firebricks.
FIRST FIRE PROCEDURE
Paint Curing and Initial Burn
Instructions for lighting the first fire to cure the heater's paint and ensure proper function.
OPERATING THE HEATER
Fuel Selection and Preparation
Details on suitable fuels, kindling, and start-up wood for optimal burning.
Fire Starting and Loading
Guidance on the process of starting a fire and loading firewood into the heater.
FAN USAGE AND OPERATION
Reloading Procedure
Instructions for safely adding fuel to the heater during operation.
Safe Operating Practices
Key practices to avoid, such as throwing wood or slamming the door.
ADVANCED OPERATION AND MAINTENANCE
Overnight Burn Preparation
How to prepare the heater for extended low or overnight burns.
High Firing for Self-Cleaning
Method for cleaning the firebox, glass, and flue through high firing.
Replacement Parts Information
Advice on where to source replacement components for the heater.
HEATER MAINTENANCE
Paint Surface Care
How to clean and maintain the heater's painted surfaces.
Door Glass and Seal Maintenance
Instructions for cleaning door glass and checking/maintaining the door seal.
DOOR AND FLUE SYSTEM CARE
Door Adjustment
Steps for adjusting the heater's door if it becomes misaligned.
Flue System Maintenance
Essential information on flue pipe cleaning, creosote buildup, and safety precautions.
FAN MAINTENANCE
Cleaning Fan Assembly
Procedures for cleaning the fan assembly in both console and inbuilt models.
BAFFLE PLATE REMOVAL
Cast Iron Baffle Removal
Step-by-step instructions for safely removing the cast iron baffle plate.
FIREWOOD GUIDELINES
Firewood Properties Table
Table detailing properties of various firewood species and their suitability.
Wood Moisture Content
Guide on the importance of wood moisture content for efficient heater performance.
WARRANTY CLAIM PROCESS
Making a Warranty Claim
Steps to follow when making a warranty claim for the heater.
WARRANTY STATEMENT DETAILS
Warranty Coverage and Exclusions
Detailed terms, conditions, exclusions, and qualifications of the heater warranty.
Need help?
Do you have a question about the SETTLER C500 and is the answer not in the manual?
Questions and answers