Related Manuals for Atlas Copco BG 375
Summarization of Contents
Safety and Operating Instructions Introduction
Safety Signal Words and Personal Safety
Defines hazard terms (DANGER, WARNING, CAUTION) and operator requirements, including PPE and health.
Operating Precautions and Hazards
Fire, Fuel, and Explosion Risks
Addresses dangers from flammable materials, ignition, and explosive environments.
Specific Operational Safety Measures
Exhaust, Projectile, and Blade Safety
Guidelines for protection against exhaust fumes, flying debris, and rotating blades.
Machine Operation Risks and Precautions
Vibration, Electrical, and Noise Hazards
Risks associated with vibration, electricity, and high noise levels.
Transport, Maintenance, and Storage
Loading, Unloading, and Maintenance Safety
Safety procedures for lifting, transport, and maintenance tasks.
Machine Overview and Components
Design, Parts, and Labels
Description of the trowel's function, identification of main parts, and understanding labels.
Machine Labels and Transport
Understanding Machine Labels
Explanation of important warning and instructional labels on the machine.
Installation and Fueling Procedures
Lifting and Transporting the Machine
Detailed steps and safety for lifting and moving the trowel.
Blade Fitting and Operation Basics
Fitting and Removing Trowel Blades
Instructions for safely changing the machine's trowel blades.
Engine Starting Procedure
Pre-Start Checks and Engine Ignition
Essential checks before starting and the step-by-step ignition process.
Engine Operation and Shutdown
Operating the Machine and Stopping
Clutch engagement, throttle control, and safe engine shutdown procedures.
Trowel Operation Techniques
Floating, Finishing, and Manoeuvring
Techniques for concrete floating, finishing, and steering the trowel.
Blade Adjustment and General Maintenance
Adjusting Blade Angle and Taking Breaks
Procedures for setting blade pitch and handling operational breaks.
Daily Maintenance and Checks
10-Hour Maintenance Routines
Daily checks for fuel, oil, air filter, and engine components.
Initial and Periodic Maintenance
First 20 Hours Maintenance and Oil Change
Tasks after initial use and engine oil replacement procedures.
Periodic Maintenance and Cleaning
Spark Plug, Cooling, and Fuel Tank Maintenance
Checks and cleaning for spark plug, cooling flanges, and fuel tank.
Component Cleaning and Repair
Pressure Plate Cleaning and Clutch Wire Repair
Procedures for cleaning the pressure plate and replacing the clutch wire.
Storage, Disposal, and Troubleshooting
Storage and Disposal Guidelines
Recommendations for safe storage and environmentally sound disposal of the machine.
Troubleshooting Common Issues
Engine Start and Rotation Problems
Diagnosing and resolving issues with engine starting and blade rotation.
Technical Data - BG 244
BG 244 Specifications and Dimensions
Engine, fluid, weight, and dimensional data for the BG 244 model.
Technical Data - BG 375
BG 375 Specifications and Dimensions
Engine, fluid, weight, and dimensional data for the BG 375 model.
Technical Data - BG 479
BG 479 Specifications and Dimensions
Engine, fluid, weight, and dimensional data for the BG 479 model.
Noise and Vibration Declaration
Noise and Vibration Data Summary
Declared sound power and vibration levels according to relevant standards.
Dimensions BG 244
BG 244 Dimensional Drawings
Visual representation of the overall dimensions for the BG 244 model.
Dimensions BG 375
BG 375 Dimensional Drawings
Visual representation of the overall dimensions for the BG 375 model.
Dimensions BG 479
BG 479 Dimensional Drawings
Visual representation of the overall dimensions for the BG 479 model.
EC Declaration of Conformity
Machine Compliance Statement
Declaration of conformity with EU Machinery and Noise Directives.
Need help?
Do you have a question about the BG 375 and is the answer not in the manual?
Questions and answers