Related Manuals for Bushranger L301
Summarization of Contents
Safety Instructions
Operator Safety
Guidelines for user safety during operation.
Trimmer/Brushcutter Safety
Specific safety precautions for the equipment itself.
Fuel Safety
Precautions for safe handling and storage of fuel.
Trimmer/Brushcutter Operating Safety
Safety measures to be observed during equipment operation.
Assembly Procedures
Engine and Drive Shaft Assembly
Instructions for connecting engine and drive shaft components.
Handle Installation
Steps for installing loop and horn handles on the shaft.
Throttle Cable and Stop Switch Connection
Procedure for connecting throttle cable and stop switch wires.
Guard Installation
Trimmer Head Guard Installation
Procedure for attaching the trimmer head guard assembly.
Blade Guard Installation
Procedure for attaching the brushcutter blade guard assembly.
Cutting Attachment Installation
Trimmer Head Installation
Steps for securely fastening the trimmer head to the shaft.
Brushcutter Blade Installation
Brushcutter Blade Attachment
Instructions for attaching the brushcutter blade to the unit.
Cutting Blades Care
Guidelines for inspecting and maintaining cutting blades.
Before Operation
Oil and Fuel Handling
Essential steps for safe management of oil and fuel.
Recommended Oil and Fuel Types
Specifications for appropriate oil and fuel for the engine.
Mixing Petrol and Oil
Step-by-step guide for correctly mixing fuel and oil.
Starting and Stopping
Cold Starting Procedure
Steps to start a cold engine using primer and choke.
Hot Restart Procedure
Method for restarting a warm engine.
Stopping the Engine
Instructions on how to safely turn off the engine.
Trimmer Operation
Trimmer Operating Position
Correct stance and grip for effective trimmer operation.
Trimmer Cutting Techniques
Methods for trimming, scaling, and mowing with the trimmer head.
Brushcutter Operation
Brushcutter Operating Position
Correct stance and grip for effective brushcutter operation.
Cutting Direction of Brushcutter Blade
Safe swinging direction to prevent blade kickback.
Cutting Blades
Guidelines for blade selection, inspection, and maintenance.
Maintenance
Air Filter Maintenance
Cleaning and replacement intervals for the air filter.
Fuel Filter Maintenance
Replacement interval and procedure for the fuel filter.
Spark Plug Service
Maintenance and replacement schedule for the spark plug.
Cylinder Cooling Fins Cleaning
Procedure for cleaning cylinder cooling fins for engine cooling.
Spark Arrester Maintenance
Inspection and cleaning procedures for the spark arrester.
Gearcase Maintenance
Gearcase Lubrication
Procedure and interval for lubricating the gearcase.
General Cleaning and Tightening
Routine cleaning and fastener checks for overall unit integrity.
Need help?
Do you have a question about the L301 and is the answer not in the manual?
Questions and answers