Related Manuals for Hunter 51589
Summarization of Contents
We Are Here to Help
Read and Save Instructions
Important safety information and instructions to keep for future reference.
Safety Warnings and Cautions
Crucial warnings and cautions regarding electrical shock, injury, compliance, and proper usage.
Choosing the Right Installation Location
Room Dimension Requirements
Ensure adequate clearance from blades to walls and floor for safe operation.
Outlet Box Compatibility
Verify the outlet box is securely mounted and rated for fan support.
Ceiling Angle Considerations
Guidance on mounting for flat and angled ceilings, including downrod and kit requirements.
Angled Ceiling Mounting Details
Details on using longer downrods and angled mounting kits for ceilings over 34 degrees.
Installing the Ceiling Bracket
Pre-Installation Power Off
Ensure power is turned off at the circuit breaker before starting installation.
Ceiling Bracket Installation Options
Methods for securing the bracket using machine screws or wood screws.
Downrod Installation Safety
Warning about securely tightening the setscrew with pliers to prevent fan fall hazards.
Wiring the Fan
Wiring for Single Switch Setup
Instructions for connecting fan wires to the ceiling wires for a single switch system.
Wiring for Dual Switch Setup
Instructions for connecting fan wires to ceiling wires for a dual switch system.
Wiring Safety Warnings
Critical warnings about grounding the fan and following electrical codes for safe wiring.
Installing the Canopy and Blades
Canopy Installation Note
Important reminder to follow blade instructions for correct installation and fan function.
Preparing the Wall Control
Wall Control: Turn Off Power
Ensure power is OFF at the outlet box and wall switch before working on the control.
Wall Control: Install Battery
Instructions for opening the battery compartment and replacing batteries.
Wall Control: Wiring
Connecting the wall control wires to the switch box wires using provided nuts.
Wall Control: Mounting
Securing the wall control to the switch box using longer screws.
Wall Control: Install Wall Plate
Attaching the wall plate over the wall control using shorter screws.
Wall Control: Turn On Power
Restoring power to the outlet box and wall switch after installation.
Remote Transmitter Pairing
Instructions on how to pair the remote transmitter with the fan receiver if needed.
Troubleshooting Fan Issues
Fan Not Working
Steps to diagnose why the fan is not operating, including power and wiring checks.
Excessive Wobbling
Solutions for excessive fan wobbling, focusing on blade installation and hanger ball seating.
Noisy Operation
Tips for resolving noisy fan operation, checking blade installation and integrity.
Fan Cleaning Tip
Advice on cleaning the fan using soft materials to prevent scratching or damage.
Limited Lifetime Warranty
Obtaining Warranty Service
How to get warranty service, including contact information and required proof of purchase.
Warranty Coverage Details
Information on what is covered under the motor's limited lifetime and one-year limited warranties.
Warranty Exclusions
What is not covered by the warranty, including labor, consumables, and damage from misuse.
Downrod Assembly Instructions
Downrod Removal and Reassembly
Step-by-step guide for removing the standard downrod and reassembling with a new one.
Downrod Assembly Safety
Critical safety warnings for downrod assembly, emphasizing secure pin insertion and hanger ball verification.
Need help?
Do you have a question about the 51589 and is the answer not in the manual?
Questions and answers