Product Identification; Optional Remote Control Accessories; Local Codes; Product Features - Desa VDCFTNA Owner's Operation And Installation Manual

Desa owner's operation and installation manual unvented (vent-free) gas compact classic hearth dual burner fireplace vdcftna,vdcftpa,vdcfrpa,vdcfrna
Table of Contents

Advertisement

pRoDUCT
iDENTiFiCaTioN
Hood
Screen
Log
Ignitor Button
Hood
Logs
Ignitor
Button
Remote
Control
(Optional)
Figure 1 - Vent-Free Compact Dual Flame
Fireplace
opTioNal REmoTE
CoNTRol aCCEssoRiEs
(For Remote-Ready Models Only)
There are four optional remote controls that
can be purchased separately for Remote-Ready
Models only:
• wall switch
• hand-held ON/OFF remote
• wall thermostat
• hand-held thermostat remote
See Accessories, page 40.
113133-01C
Fireplace
Cabinet
Control
Knob
Fireplace Cabinet
Control Knob
www.desatech.com

loCal CoDEs

Install and use fireplace with care. Follow all local
codes. In the absence of local codes, use the lat-
est edition of The National Fuel Gas Code ANSI
Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269

pRoDUCT FEaTUREs

SAFeTY PILOT
This fireplace has a pilot with an Oxygen Deple-
tion Sensing (ODS) safety shutoff system. The
ODS/pilot is a required feature for vent-free room
fireplaces. The ODS/pilot shuts off the fireplace if
there is not enough fresh air.
PIezO IGNITION SYSTeM
This fireplace has a piezo ignitor. This system
requires no matches, batteries or other sources to
light fireplace.
THERMOSTATIC HEAT CONTROL
FOR THERMOSTAT-CONTROLLED
MODELS
Thermostat-Controlled models have a thermostat
sensing bulb and a control valve. The thermostat
will automatically modulate the heat output to
maintain a consistent room temperature. This
results in greater fireplace comfort. This can also
result in lower gas bills.

UNpaCkiNG

1. Remove fireplace and hood from carton.
Log is wrapped and inside fireplace. Do not
remove at this time.
2. Remove all protective packaging applied to
fireplace for shipment.
3. Make sure your fireplace includes one hard-
ware packet.
4. Check fireplace for any shipping damage. If
fireplace is damaged, promptly inform dealer
where you bought fireplace.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vdcftpa

Table of Contents