Advertisement
Quick Links
Advertisement
Related Manuals for Streumaster SW 16 TC
Summary of Contents for Streumaster SW 16 TC
- Page 1 Quick Guide SW - Model C S035364_00...
- Page 2 First Machine Check CHECK...
- Page 3 Start Display (AT9+AT13) 2. Switch on control box 1. Switch on ignition...
- Page 4 Activate Pump Truck and trailer uses the same pump = 1000 rpm During working time is the auxiliary engine runing at full throttle Let the machine run with the self‐cleaning mode for one minute when the machine was = 2900 rpm not working for a longer time.
- Page 5 Container Filling Filling with max. 1 bar open close Open the vent valve before removing the filling hose!
- Page 6 Determination Bulk Density Determine the spreading quantity and binder density by using the bulk weight index...
-
Page 7: Operation Set Up
Operation Set Up Always watch machine loading, it should be between 20% and Always press the green marked keys... -
Page 8: Correction Factor
Correction factor: Only without WeighTronic hould Example: 9,57‐4,8 kg x 4 = 19,8 kg 20,5 kg : 19,8 kg = 1,04 factor There is no correction factor line with a WeighTronic System... - Page 9 Self – Cleaning Mode After spreading 5 -10min Before first filling approx.1...
- Page 10 Cleaning Even with the self-cleaning program, material rest´s could stay in the sluice output. These must be removed by hand.
-
Page 11: Lubrication Points
Lubrication points 2x chain tension axle 2 stroke 2x chain drive axle 2 stroke 9x = 2x auger bearing 2 stroke 3x rotor bearing 2 stroke... - Page 12 Contact Streumaster Maschinenbau GmbH 84546 Egglkofen - Handwerkstrasse 1 Phone: +49 (0) 8639.608 0 Fax: +49 (0) 8639.608 51 E-Mail: info@streumaster.com ______________________________________ Service Hotline: +49 (0) 8639.608 555 E-Mail: service@streumaster.com...
Need help?
Do you have a question about the SW 16 TC and is the answer not in the manual?
Questions and answers