Related Manuals for Atop AT705
Summarization of Contents
Introduction
1.1 Introduction
Overview of the ABLEPick paperless picking system.
ABLEPICK HARDWARE INTRODUCTION
3.1 TCP/IP CONTROLLER
Details on TCP/IP controllers used in the system.
3.1.1 AT500-Standard TCP/IP controller.
Configuration and connection for AT500 controller.
3.1.2 AT400-Compact TCP/IP controller.
Details on the AT400 compact TCP/IP controller.
3.1.2.1 Abnormal voltage protection function
Protection features against abnormal voltage for AT400.
3.2 Picking Tag
Introduction to various picking tag models.
3.2.1 5-digit picking tag (AT505 & AT705)
Details of 5-digit picking tags AT505 and AT705.
3.2.1.1 LED light.
Description of LED light colors and configurations for AT5XX/AT7XX.
3.2.1.2 3 Buttons.
Functionality of the three buttons on picking devices.
3.2.2 3-digit picking tag (AT703)
Details of the 3-digit picking tag AT703.
3.2.3 2-digit picking tag (AT502 & AT702)
Details of 2-digit picking tags AT502 and AT702.
3.2.4 3-digit directional picking tag(AT503A)
Details of the 3-digit directional picking tag AT503A.
3.2.5 4-digit directional picking tag(AT504A)
Details of the 4-digit directional picking tag AT504A.
3.2.6 2-digit vertical directional picking tag(AT502V)
Details of the 2-digit vertical directional picking tag AT502V.
3.2.7 6-digit, 2 separated windows picking tag(AT506-2W-33)
Details of the 6-digit, 2-window picking tag AT506-2W-33.
3.2.8 6-digit, 3 separated windows picking tag(AT506-3W-123)
Details of the 6-digit, 3-window picking tag AT506-3W-123.
3.2.9 12-digit alphanumerical display(AT50C & AT70C)
Details of 12-digit alphanumerical displays AT50C & AT70C.
3.2.10 10-digit, 3 separated windows alphanumerical picking tag(AT50A-3W-523)
Details of 10-digit, 3-window picking tag AT50A-3W-523.
3.2.11 3-digit, 4 lightable buttons picking tag(AT503-4K)
Details of 3-digit, 4-button picking tag AT503-4K.
3.2.12 Economic picking tag(AT50N & AT70N)
Details of economic picking tags AT50N & AT70N.
3.2.13 6-digit order display(AT506 & AT706)
Details of 6-digit order displays AT506 & AT706.
3.2.14 Bay indicator(AT511)
Details of the AT511 bay indicator.
3.2.15 Completion indicator(AT510)
Details of the AT510 completion indicator.
3.2.16 Melody completion indicator(AT510M & AT710M)
Details of melody completion indicators AT510M & AT710M.
3.2.17 RS232 converter(AT530/AT530L & AT730)
Details of RS232 converters AT530/AT530L & AT730.
3.2.17 6-digit, 2-color display pick tag(AT706-24-3K)
Details of the 6-digit, 2-color display pick tag AT706-24-3K.
ABLEPICK TCP/IP COMMUNICATION PROTOCOL
4.1 Communication Control Block (CCB) format
Format of the Communication Control Block for data transmission.
4.2 Sub-command List
List of available sub-commands for communication.
4.3 Send Command to Tags (PC→TCP/IP controller)
Commands sent from PC to tags via controller.
4.3.1 Showing alphanumerical characters on 7-segment LED display
Command to display characters on the 7-segment LED.
4.3.2 Turn off 7-segment LED display or clear all message buffers.
Command to turn off LED display or clear buffers.
4.3.3 Turn LED indicator ON
Command to turn on the LED indicator.
4.3.4 Turn LED indicator OFF
Command to turn off the LED indicator.
4.3.5 Turn Buzzer ON
Command to turn on the buzzer.
4.3.6 Turn Buzzer OFF
Command to turn off the buzzer.
4.3.7 Flashing the display on 7-segment LED display
Command to make the 7-segment LED display blink.
4.3.8 Flashing the LED indicator
Command to make the LED indicator blink.
4.3.9 Configure the flashing time interval
Command to set the blinking time interval for LEDs.
4.3.10 Showing tag's node address on display
Command to display the tag's node address.
4.3.11 Disable the shortage/down-count button
Command to disable the shortage/down-count button.
4.3.12 Enable the shortage/down-count button
Command to enable the shortage/down-count button.
4.3.13 Emulating push confirmation button
Command to emulate a push confirmation button.
4.3.14 Emulating push shortage/down-count button
Command to emulate a push shortage/down-count button.
4.3.15 Switching to stock mode
Command to switch the tag to stock mode.
4.3.16 Switching to picking mode
Command to switch the tag to picking mode.
4.3.17 Disable the confirmation button
Command to disable the confirmation button.
4.3.18 Enable confirmation button
Command to enable the confirmation button.
4.3.19 Set available number of digits for up/down counting
Command to set digits for up/down counting.
4.3.20 Set Tag's specific configuration
Commands for specific tag configurations.
4.3.20.1 Configure the LED light's color
Command to configure the LED light color.
4.3.20.2 Set valid digits for up/down counting
Command to set valid digits for up/down counting.
4.3.20.3 Disable/Enable tag mode configuration (Type 1)
Commands to disable/enable tag modes.
4.3.20.3 Disable/Enable tag mode configuration (Type 2)
Commands to disable/enable tag modes (Type 2).
4.3.20.4 Set LED blinking time interval
Command to set LED blinking time interval.
4.3.20.5 Set digits blinking time interval (digit by digit)
Command to set blinking interval per digit.
4.3.20.6 Set Digits brightness
Command to set digit brightness.
4.3.20.7 Configure Special function
Commands for configuring special tag functions.
4.3.21 Get device's F/W model information
Command to retrieve device F/W model information.
4.3.22 Get device's detail configured information
Command to retrieve detailed device configuration.
4.3.23 Configure the TCP/IP controller's polling range
Command to configure TCP/IP controller polling range.
4.3.23 Getting all the device's status under one TCP/IP controller
Command to get status of all connected devices.
4.3.24 Asking device to reset
Command to force a specific device to reset.
4.3.25 Configure the device's node address
Command to configure device node address.
4.4 Receive message from Tags (PC←TCP/IP controller)
Messages received from tags by the host.
4.4.1 Returning confirmation message from push-button
Message when confirmation button is pressed.
4.4.2 Returning shortage message from push-button
Message when shortage button is pressed.
4.4.3 Returning device timeout
Message when a device times out.
4.4.4 Returning a device malfunction
Message when a device malfunctions.
4.4.5 Returning an illegal command
Message for an illegal command.
4.4.6 Returning push-button locked message
Message when a push-button is locked.
4.4.7 Returning a device resetting OK
Message indicating successful device reset.
4.4.8 Returning quantity under stock mode
Message for quantity in stock mode.
4.4.9 Returning all devices' communication status
Message for communication status of all devices.
4.4.10 Special return code.
Special return codes for button events.
4.4.11 Return device's F/W model string.
Returns the device's F/W model string.
4.4.12 Return device's detail information
Returns detailed device information.
4.5 Specific protocol for some light models
Specific protocols for different light models.
4.5.1 Protocol for AT50C/AT70C
Communication protocol for AT50C/AT70C models.
4.5.2 Protocol for AT504/AT503A/AT502V
Communication protocol for AT504/AT503A/AT502V.
4.5.3 Protocol for AT506-3W-123
Communication protocol for AT506-3W-123.
4.5.4 Protocol for AT530/AT730
Communication protocol for AT530/AT730 converters.
4.5.4.1 Configure the data receiving block time interval.
Configure data receiving block time interval.
4.5.4.2 Enable the flow control function
Enable the flow control function for RS232.
4.5.4.3 Disable the flow control function
Disable the flow control function for RS232.
4.5.4.4 Send message to RS-232 port
Send message to the RS-232 port.
4.5.5 Protocol for AT510M/AT710M
Communication protocol for AT510M/AT710M.
4.5.5.1 Selection of AT510M/AT710M's songs
Select songs for AT510M/AT710M melody indicator.
4.5.5.2 Adjust the volume of AT510M/AT710M's speaker
Adjust speaker volume for AT510M/AT710M.
4.5.6 Protocol for AT503-4K
Communication protocol for AT503-4K.
4.5.6.1 Display data with the illuminant buttons
Display data using illuminant buttons on AT503-4K.
4.5.6.2 Return message while sending by 30H
Return message from AT503-4K after sending by 30H.
4.5.6.3 Controlling of the 4 illuminant buttons solely by 31H
Control illuminant buttons individually via 31H.
4.5.6.4 Return message while sending by 31H
Return message after sending by 31H.
4.5.6.5 Clear all the display and buffer
Command to clear display and buffers.
4.5.6.6 Function keys return when buffer is clear
Function key return after buffer clear.
4.5.6.7 Message return when buffer is empty
Message when buffer is empty.
4.5.6.8 Define the valid time duration on two contiguous pressing on the buttons.
Define valid time for contiguous button presses.
4.5.6.9 Tag mode configuration
Configure tag mode for AT503-4K.
4.5.6.10 AT503-4K auto-demonstrating function
AT503-4K auto-demonstration function.
Advanced way to configure device's node address
(1). Node address checking mode: display the specific node address.
Mode to display specific node address.
(2). Node address setup mode: Can be re-configured to the specific node address.
Mode to reconfigure the specific node address.
AT400 compact TCP/IP controller's alarm status control
6.1 Read Alarm status
Command to read alarm status from AT400.
6.2 Return Alarm status from AT400
Returns alarm status information from AT400.
6.3 Enable/Disable the alarm auto-report function
Enable/disable automatic alarm status reporting.
6.3.1 Return the alarm auto-report mode
Returns the current alarm auto-report mode status.
6.4 Enable/Disable the alarm auto-buzzer function
Enable/disable automatic alarm buzzer function.
6.4.1 Return the alarm auto-buzzer mode
Returns the current alarm auto-buzzer mode status.
Need help?
Do you have a question about the AT705 and is the answer not in the manual?
Questions and answers