Related Manuals for MECANIL SG280 RC-T G2
Summarization of Contents
Safety Instructions
General Safety Instructions
General safety rules and precautions for operating the grapple saw and associated machinery.
Installation
Recommendations and Tips for Installation
Offers advice on hydraulic lines, connectors, and mounting for optimal grapple saw performance.
Contents of Delivery
Radio Control - Handheld Remote (RC-T)
Details the items provided for the RC-T wireless control system.
Radio Control - Separate Pushbuttons (RC-M)
Lists the components for the RC-M wireless control system with separate pushbuttons.
Radio Control - Separate Pushbuttons with Collecting Unit (A RC-M)
Details the components for the RC-M control system including the collecting unit.
Cable Control - Without Collecting Unit
Lists components for the cable-controlled grapple saw without a collecting unit.
Cable Control - With Collecting Unit (A)
Lists components for the cable-controlled grapple saw with a collecting unit.
Use and Maintenance
Initial Check Before Use
Outlines critical pre-operation checks for the grapple saw, including valve status and hose connections.
Daily Use and Maintenance
Service and Maintenance Procedures
Covers regular service, repairs, and the importance of using original parts for optimal performance.
Chain Lubrication
Explains how and where to fill chain lubrication oil for the grapple saw.
Drive Belt Maintenance
Tensioning the Drive Belt
Step-by-step instructions with images for adjusting the drive belt tension on the saw motor.
Saw Chain Maintenance
Tensioning the Saw Chain
Details the process of tensioning the saw chain using eccentric movement and hand adjustment.
Replacing Saw Bar and Chain
Taking Saw Bar and Chain Off
Instructions for loosening nuts and releasing the chain to remove the saw bar and chain.
Installing New Saw Bar and Chain
Guide on how to properly install a new saw bar and chain, including final tensioning.
Hydraulics
Valve Set Components
Lists and describes the individual components of the hydraulic valve set used in the grapple saw.
Electronics
Electronics Schematic Diagrams
Presents schematic diagrams for cable control and wireless remote systems.
Technical Data - Wireless Control
Transmitter - 3 Buttons Specifications
Detailed technical data for the 3-button wireless transmitter unit.
Transmitter - Separate Pushbuttons Specifications
Technical data for the wireless transmitter system utilizing separate pushbuttons.
Need help?
Do you have a question about the SG280 RC-T G2 and is the answer not in the manual?
Questions and answers