Related Manuals for Opengear CM8132
Summarization of Contents
Register Product
Product Registration and Benefits
Register product for warranty activation and firmware update notifications.
What's in the Box
CM8100 Device Description
Overview of CM8100 features: CPU, firmware, security, console port, connectivity, and power.
Device Variations
Dual DC Power Supply (DDC) Options
Details DDC options featuring a dual DC power supply.
10G Ethernet Network Interfaces
Specifies network interfaces for 10G models: NET1, NET2 (SFP+), NET3 (Copper).
Kit Contents
List of Kit Contents
Itemized list of included components: device, power cables, DDC terminals, rack screws, rack ears, serial adapter, and network cable.
Hardware Installation
Connect Network Interfaces
Connect device to network, configure static IP for NET1, and understand firewall zones.
Connect Serial Devices
Connect managed devices to the serial interfaces on the front of the unit.
Connect USB Devices
Connect USB serial devices to the unit's USB 3 slots if needed.
Connect The Power
AC Power Connection
Connect power cable to the rear of the unit for AC-only models.
DDC Power Connection
Connect DDC terminals to the DC power cable for DDC options.
Access The Device
Log in via the Web UI
Access web UI via browser, use default login, and handle SSL warnings.
Change Root Password
Prompt to change root password immediately after first login.
Configure SNMP Power Alerts
Set Voltage Range Alerts
Configure alerts for system reboots or voltage fluctuations.
Configure Serial Ports
Change Serial Port Settings
Navigate, edit, change settings (mode, pinout, baud, data bits, parity, stop bits), and apply.
Configure Local Console
Configure RJ45 Serial Console
Configure local console settings like baud rate, data bits, parity, stop bits, and emulation.
Configure Network
Configure Physical Interfaces
Configure media and MTU for physical interfaces like NET1.
Modify Default IPv4 Static Interface
Edit IPv4 address and network mask for NET1.
Create New Administrative User
Add and Configure New User
Create new user, assign to admin group for privileges, save, and log in.
Access Device Consoles
Access via Web UI
Use Web Terminal button to access serial ports via web.
Access via Console/SSH
Use pmshell command or SSH with specific syntax for device access.
Lighthouse Centralized Management
Enroll Device in Lighthouse
Navigate, add enrollment, enter details, and apply to enroll device in Lighthouse.
Need help?
Do you have a question about the CM8132 and is the answer not in the manual?
Questions and answers