Related Manuals for Kreg ProPack K2000
Summarization of Contents
Three Steps to Your First Pocket Hole Joint
Step 1: Set the Drilling Depth
Sets the drilling depth by adjusting the depth collar on the drill bit.
Step 2: Prepare Workpieces and Drill Holes
Prepares workpieces and drills pocket holes using the jig.
Step 3: Drive Screws to Secure the Joint
Drives screws to securely join the workpieces.
Setting Up the K2000 Kreg Jig®
Mounting the K2000 Kreg Jig
Guidance on mounting the K2000 Kreg Jig to a workbench or base.
Using the K2000 Kreg Jig®
Joining 1/2” Thick Material
Instructions for joining 1/2" thick material with the K2000 Kreg Jig.
Joining 3/4” Thick Material
Instructions for joining 3/4" thick material with the K2000 Kreg Jig.
Joining 1-1/2” Thick Material
Instructions for joining 1-1/2" thick material with the K2000 Kreg Jig.
K2000 Jig Material Width Adjustments
Spacing for 1-1/4" to 1-3/4" Material
Spacing drill guides B & C for material width 1-1/4" to 1-3/4".
Spacing for 1-3/4" to 2-3/4" Material
Spacing drill guides A & B for material width 1-3/4" to 2-3/4".
Spacing for 2-3/4" to 3-3/4" Material
Spacing drill guides A & C for material width 2-3/4" to 3-3/4".
K2000 Kreg Jig® Tips and Tricks
Pocket Hole Placement Tips
Tips for optimal pocket hole placement using the K2000 Jig.
Portable K2000 Jig Usage
Instructions for using the K2000 Kreg Jig in a portable setup.
Using the Support Wings
Explanation of the function and use of the support wings.
Rocket™ Jig Setup and Features
Rocket™ Sliding Base Plate
Details the sliding base plate and its features for the Rocket Jig.
Using the Rocket™ Jig
Joining 1/2” Thick Material
Instructions for joining 1/2" thick material with the Rocket Jig.
Joining 3/4” Thick Material
Instructions for joining 3/4" thick material with the Rocket Jig.
Joining 1-1/2” Thick Material
Instructions for joining 1-1/2" thick material with the Rocket Jig.
Mini Kreg Jig® Setup
Plug Setting Feature
Describes the recess for seating pocket hole plugs.
Using the Mini Kreg Jig®
Joining 1/2” Thick Material
Instructions for joining 1/2" thick material with the Mini Kreg Jig.
Joining 3/4” Thick Material
Instructions for joining 3/4" thick material with the Mini Kreg Jig.
Joining 1-1/2” Thick Material
Instructions for joining 1-1/2" thick material with the Mini Kreg Jig.
Selecting the Correct Screw
Choosing the Right Screw Type
Guides on selecting the appropriate screw for pocket hole joinery.
Understanding Thread Types
Explains fine, coarse, and Hi-Lo thread types for screws.
Screw Head Styles and Lengths
Screw Length Selection
Details the available screw lengths and selection criteria.
Screw Penetration by Jig Setting
1/2" Setting Penetration
Illustrates screw penetration for the 1/2" setting.
3/4" Setting Penetration
Illustrates screw penetration for the 3/4" setting.
1-1/2" Setting Penetration
Illustrates screw penetration for the 1-1/2" setting.
Self-Tapping Screw FAQs
Thread Type for Wood Species
Advice on choosing screw threads for different wood types.
Selecting the Correct Screw Length
Guidance on selecting the correct screw length for various applications.
Troubleshooting Wood Splitting
Troubleshooting tips for wood splitting during screw driving.
Preventing Screw Head Breakage
Advice on preventing screw heads from breaking off.
Screws for 1/2” Plywood
Specific recommendation for using screws in 1/2" plywood.
Face Frames
Face Frame Components Explained
Defines the components of a face frame (Rail and Stile).
Standard Face Frame Dimensions
Provides typical dimensions for face frames.
Steps to Building a Face Frame
Outlines the process for building a face frame.
Leg and Rail Joints
Leg and Rail Components
Defines the components of a leg and rail joint.
Standard Leg and Rail Dimensions
Provides typical dimensions for leg and rail assemblies.
Steps to Building a Leg and Rail Joint
Outlines the process for building a leg and rail joint.
Mitered Joints
Miter Joint Components
Defines the components of a miter joint.
Standard Miter Dimensions
Provides standard angles and dimensions for miter joints.
Steps to Building a Miter Joint
Outlines the process for building miter joints.
Angled Joints and Curves
Angle Joint Components
Defines components for angled joints (Angled Stile, 90 degree Stile, Assembly Jig).
Steps to Building an Angled Joint
Outlines the process for building angled joints.
Edgebanding
Edgebanding Components
Defines the components for edgebanding.
Steps to Assemble Edgebanding
Outlines the process for assembling edgebanding.
Edgejoining
Edgejoining Standard Dimensions
Provides standard dimensions for edgejoining.
Steps to Edgejoin a Tabletop
Outlines the process for edgejoining a tabletop.
Plugging a Pocket Hole
Anatomy of a Pocket Hole Plug
Describes the anatomy and characteristics of a pocket hole plug.
Steps to Plug a Pocket Hole
Outlines the process for plugging a pocket hole.
General FAQ: Drill Bit and Material Usage
Drill Bit Requirements and Usage
Explains drill bit requirements and usage for pocket holes.
Pilot Holes and Material Compatibility
Discusses pilot holes and using jigs with melamine/MDF.
General FAQ: Wood Movement and Joint Stability
Recommended Pocket Hole Spacing
Recommends pocket hole spacing for panels.
Addressing Wood Movement During Assembly
Offers solutions for wood movement during joint assembly.
Seasonal Wood Expansion Compensation
Provides methods to compensate for wood expansion/contraction.
Pocket Hole Joint Strength and Plugs
Pocket Hole Joint Strength Comparison
Compares pocket hole joint strength to mortise and tenon joints.
Pocket Hole Plug Fit and Finishing
Addresses plug fit and sanding flush.
Using Glue with Pocket Hole Joinery
Discusses the use of glue with pocket hole joinery.
Drill Bit Maintenance and Service
Maximizing Drill Bit Lifespan
Provides guidelines for maximizing drill bit life.
Drill Bit Sharpening Expectations
Estimates the number of holes before drill bit sharpening is needed.
Kreg Drill Bit Sharpening Service
Explains the Kreg drill bit sharpening service.
Warranty and Contact Information
Pocket Hole Jig Warranty Details
Details the warranty coverage for Kreg pocket hole jigs.
Drill Bit Warranty Clarification
Clarifies that drill bits are not covered by warranty.
Kreg Tool Company Contact Information
Provides contact details for Kreg Tool Company.
Need help?
Do you have a question about the ProPack K2000 and is the answer not in the manual?
Questions and answers