Page 2
Data is subject to change without notice. For the latest update, please refer to the online version available on www.coastalsource.com. Designed in Italy...
Page 5
2 3 4 5 6 Control panel ON LED and STANDBY LED Armonía callback push button Soft Reset push button Hard Reset push button Self Check Global status LED strip LED panel Channel status LED bars 10. Channel 4 level potentiometer 11.
Page 7
Bill of connectors Name Plug INPUT Phoenix MC 1,5/12-ST-3,81 1803675 OUTPUT Phoenix PC 5/ 8-STF1-7,62 1777891 ground GPO/ALARM Phoenix MC 1,5/12-ST-3,81 1803675 REMOTE ON|OFF Phoenix MC 1,5/4-ST-3,81 1803594 mains AC MAINS IEC C19 Low-Z High-Z 100V HPF @ 35 Hz HPF @ 70 Hz •...
Page 8
RCA INPUT CABLE ADAPTERS (2 pairs included with each CRS Amplifier) XLR INPUT CABLE ADAPTERS (sold separately (in pairs) for balanced inputs) CC OUTPUT CABLE ADAPTERS (sold separately (in pairs) for Coastal Connector outputs) 8 | Component Rack System...
Page 9
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) aims to minimise the impact of electrical NOTE: CRS Amplifiers may be and electronic goods on the environment. Coastal Source mounted vertically as long as there complies with the Directive 2012/19/EU of the European is at least 20”...
Important Safety Instructions CAUTION EXPLANATIONS OF GRAPHICAL SYMBOLS RISK OF ELECTRIC SHOCK DO NOT OPEN The Lighting Flash with Arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltages” Electrical energy can perform many useful functions. within the product enclosure that may be of sufficient This unit has been engineered and manufactured to ensure CLASS3...
In case you have any questions, please inspect your new product. If you find any damage notify the do not hesitate to contact your dealer or Coastal Source. shipping company or retailer immediately. The CRS amplifier is specifically designed for installation The box contains the following: applications.
CRS amplifiers can be stacked one on top of the other improper or missing ground connection. due to the efficient cooling system they are equipped with. f Contact your dealer or Coastal Source for ordinary There is however a safety limit to be observed: in case and extraordinary maintenance.
IEC 364 or similar rules. Please consider that the operating condition can be modified by the REMOTE ON and REMOTE OFF configuration (see Coastal Source recommends plugging the §3 : 9.Remote ON/OFF (standby mode). CRS Amplifier into a 20A rated breaker.
Coastal Source includes (2)pairs of RCA input cables of the analog and digital sources, in order to compensate with each CRS amplifier for factory quality input connections.
Coastal Source recommends to use the built-in HPF (High implements triggering signals to broadcast alarms. Pass Filter) when the amplifier is set to drive a distributed CRS amplifiers provide a pair of paralleled general line to prevent loudspeaker transformer saturation which purpose output connections per channel: one Normally can considerably degrade sound performance.
5 : 3.Operating mode LEDs LED chart The operating mode LEDs are located on the control panel. They state the operating mode when the system either is on or in standby mode. The front LED panel of the amplifier includes four LED bars for output signal metering and one LED strip with Operating mode Color...
FIG. 3: System OK. Networking 6 : 1.1. Global faults CRS amplifiers support star network topology via the FIG. 4: Ethernet port and Dante networking via the Dante port only. Power supply fault The Ethernet port is designed to allow the remote control of the amplifier through Armonía Pro Audio Suite and third party software.
Armonía f Advanced processing. This allows you to optimize levels and shape the sound of the input signals. Gain Pro Audio Suite and polarity adjustment, asymmetric raised-cosine full parametric filters, delay and mute are available on each channel routed to the speaker section. Armonía Pro Audio Suite is the default configuring f Speaker equalization.
The service costs are calculated on the local rate applied by Coastal Source. Warranty and f The repair time has been set from Coastal Source and it’s equally applied in all cases. Assistance f The unit will be evaluated by a technician, and Coastal Source will provide the customer with the 10 : 1.Warranty...
All returned Coastal Source units must be shipped to the following address: Coastal Source 1270 Glen Avenue Moorestown, NJ 08057 Phone: 1-800-719-1996 Email: warranty@coastalsource.com Phone Support Hours Monday - Friday 9AM to 5PM EST 10 : 2.4. D.O.A. Procedure In case of a D.O.A. (Dead On Arrival) product, we kindly...
Specifications CRS2800/4 Channel Handling Output Stage Maximum output power per channel @ 8 Ω 700 W 4 Hi-Z or Lo-Z Number of output channels Phoenix PC 5/8-STF1-7,62 (bridgeable per ch. pair) Maximum output power per channel @ 4 Ω 700 W Number of input channels Maximum output power per channel @ 2 Ω...
Page 22
CRS1400/4 Channel Handling Output Stage Maximum output power per channel @ 8 Ω 350 W 4 Hi-Z or Lo-Z Number of output channels Phoenix PC 5/8-STF1-7,62 (bridgeable per ch. pair) Maximum output power per channel @ 4 Ω 350 W Number of input channels Maximum output power per channel @ 2 Ω...
Page 23
CRS700/4 Channel Handling Output Stage Maximum output power per channel @ 8 Ω 175 W 4 Hi-Z or Lo-Z Number of output channels Phoenix PC 5/8-STF1-7,62 (bridgeable per ch. pair) Maximum output power per channel @ 4 Ω 175 W Number of input channels Maximum output power per channel @ 2 Ω...
Page 24
Coastal Source 1270 Glen Avenue Moorestown, NJ 08057 Tel: 1-800-719-1996 General inquiries: info@coastalsource.com Service & maintenance: warranty@coastalsource.com www.coastalsource.com...
Need help?
Do you have a question about the CRS2800/4 and is the answer not in the manual?
Questions and answers