Table of Contents
Advertisement
Quick Links
AGROMET PILMET Sp. z o.o.
ul. Fabryczna 2
PL 49 – 301 BRZEG
tel. + 48 77 444 45 86
fax. + 48 77 416 20 83
Tel. helpline + 48 77 444 45
11
www.uniagroup.com
MANURE SPREADERS
TYTAN premium 11; 13; 18
OPERATING AND MAINTENANCE
MANUAL SPARE PARTS CATALOG
Before commissioning the machinery you need to
read and understand the Operating Manual and
follow the safety recommendations included.
Advertisement
Table of Contents
Related Manuals for UNIA TYTAN premium 13
Summary of Contents for UNIA TYTAN premium 13
- Page 1 + 48 77 416 20 83 Tel. helpline + 48 77 444 45 www.uniagroup.com MANURE SPREADERS TYTAN premium 11; 13; 18 OPERATING AND MAINTENANCE MANUAL SPARE PARTS CATALOG Before commissioning the machinery you need to read and understand the Operating Manual and...
- Page 2 Operating Manual TYTAN premium Developed by: AGROMET PILMET sp. z o.o. Design Office of AGROMET PILMET Sp. z o.o. in Brzeg reserves the right to implement structural modifications into the manufactured machinery, which can facilitate operation and improve work quality. Please list any notes and observations on the machinery structure and operation in the attached survey, and send it to the manufacturer’s address.
-
Page 3: Table Of Contents
Operating Manual TYTAN premium TABLE OF CONTENTS Work safety principles - p. 3 Limitations related to traveling on public roads - p. 4 III. Aggregation, loading, transportation - p. 4 First start-up - p. 4 General and commercial information - p. 5 Safety symbols - p. -
Page 4: Work Safety Principles
Operating Manual TYTAN premium INTRODUCTION: This Operating Manual, provided with the machinery, is intended to inform the user about correct operation and exploitation of the spreader. Careful observance of the recommendation included in the Manual will ensure safe and efficient machinery operation. In case of any problems or doubts related to operation and exploitation, please contact with an authorized seller or the manufacturer’s Sales Department. -
Page 5: Limitations Related To Traveling On Public Roads
Operating Manual TYTAN premium II. LIMITATIONS RELATED TO TRAVELING ON PUBLIC ROADS The manure spreader is equipped with electric and pneumatic installations. It’s adjusted to traveling on public roads with a tractor. There is a bracket for a vehicle marking plate to be installed on the machinery’s rear side. If you don’t have a vehicle marking plate, you can buy it in a manufacturer’s store. -
Page 6: General And Commercial Information
Operating Manual TYTAN premium NOTE: During several first hours of operation you need to pay special attention to correct tightening of the bolts. When the workday is completed, you need to clean the manure spreader carefully, rinse it with water, and when it’s dry - check for any damages of the paint layer and cover them with a thin layer of oil. -
Page 7: Safety Symbols
Operating Manual TYTAN premium VI. SAFETY SYMBOLS Do not enter the load-carrying box when the drive is turned on Aggregation with a tractor equipped with a catch for single-axis trailers (placed on the drawbar) Designation of a transportation hook Speed and direction of rotation of a jointed shaft (located on the front wall) Danger caused by broken-up fertilizer being spread sideways. -
Page 8: Noise And Vibrations
Operating Manual TYTAN premium VII. NOISE AND VIBRATIONS Average noise level during the spreader work does not exceed 79 dB(A). Measurement of the noise level was carried out during a standstill, pursuant to attachment D of the PN-EN 1553:2002 standard. While working with the spreader, the operator should sit in the tractor’s cab, or wear hearing protection. -
Page 9: Technical Characteristics Of The Spreader
Operating Manual TYTAN premium 4. Technical specification. Technical data of the Tytan premium spreader: TYTAN 11 TYTAN 13 TYTAN 18 Size TYTAN 11 „td” „td” „td” Kerb weight [kg] 4550 4600 5245 5320 Rated carrying capacity [t] Carrying capacity in the field [t] Total length [m] Total width [m] 2.65... -
Page 10: Structure And Operation
Operating Manual TYTAN premium 5. Structure and operation. 5.1 Power transmission system (Fig. 3.1) Fig. 3.1 Power transmission system scheme. 1 - jointed-telescopic shaft; 2 - front bearing sleeve; 3 - jointed shaft; 4 - internal housing; 5 - jointed shaft; 6 - internal housing II;... -
Page 11: Floor Conveyor
Operating Manual TYTAN premium Mechanism adjusting tension of the chains, individually for each chain, are located in the front part of the load-carrying body. When the conveyor feeds forwards (towards the tractor), you must be careful so the moved material does not damage or push the front wall of the load-carrying body. -
Page 12: Hydraulic Installation
Operating Manual TYTAN premium The service brake, with rated load on the trailer, according to the Highway Code regulations, allows to reach a delay in braking of at least 2.5 m/s2, with braking distance below 10 m. The auxiliary parking brake holds the spreader uncoupled from the tractor on a surface inclined at up to 16% (elevation or drop). - Page 13 Operating Manual TYTAN premium Fig. 6 Electric installation scheme 1 – Traffic indicator light (light bulb 21W); 2 – Navigation light (light bulb 5W); 3 – Brake light (light bulb 21W); 4 – Front navigation light (light bulb 10W); 5 – connector joint;...
-
Page 14: Spreader Utilization
Operating Manual TYTAN premium 6. Machinery utilization and adjustment for work. 6.1. Machinery preparation and adjustment for work The spreader is sent from the facility completely assembled, adjusted for manure spreading. While preparing the spreader for work, you need to couple it to the tractor. For that purpose, you need to place the drawbar at the tractor’s catch level (a catch for single-axis trailers) using an adjustable support screwed to the front part of the frame. - Page 15 Operating Manual TYTAN premium Fig. 9 Coupling the spreader to a tractor. On a catch to single-axis trailers (hitch) 1 – spreader’s drawbar; 2 – catch for single-axis trailers ø50; 3 – drawbar’s catch string; 4 – jointed-telescopic shaft; 5 – shaft’s cover. On a catch for single-axis trailers (upper catch) 1 –...
-
Page 16: Loading And Unloading The Trailer
Operating Manual TYTAN premium 6.3. Loading and unloading the trailer. The trailer should be loaded with a crane, loader or conveyor. The load should be distributed evenly throughout the whole surface of the load-carrying box floor. Loading of the manure (peat or compost) should be realized from the rear to the front side of the trailer, what exerts positive influence on quality of later spreading. - Page 17 Operating Manual TYTAN premium ones. The drums are embedded on an intersecting axis gear with flexible clutches, and bearing mounted from the top in ball bearings. The manure fed by the floor conveyor is received by the rollers and spread on the field. While working with a vertical or horizontal adapter, the damper must be taken maximally upwards.
-
Page 18: Adjustment Of The Conveyor Chains Tension
Operating Manual TYTAN premium Dose of the spread manure depends on: - feeding speed of the floor conveyor, resulting from the hydraulic oil flow rate through the flow adjuster. - spreader’s speed of travel on the field; - volume weight of the applied fertilizer; - working width;... -
Page 19: Brakes Regulation
Operating Manual TYTAN premium 6.4.4. Adjustment of brakes (Fig. 5) The brakes are adjusted separately from each of the four wheels of the trailer. In order to check for backlash and adjust the brakes, you need to: couple the spreader with a tractor and secure the tractor from rolling down; lift the wheelset axis with a hoist;... -
Page 20: Drive Through Jointed Shafts
Operating Manual TYTAN premium 6.4.5. DRIVE THROUGH JOINTED SHAFTS Mounting and demounting of the jointed shaft can be carried out only when the motor is turned off and the key is taken out of the ignition switch! You must never turn the jointed shaft on if the motor is turned off! Nobody can be present near the working jointed shaft! Take care of attachment and adequate condition of the protection pipe and the jointed... -
Page 21: Faults In The Machinery Operation And Their Removal
Operating Manual TYTAN premium 6.5. Faults in the machinery operation and their removal Type of fault Cause of fault Manners of removal Remove cause Overload drive overload (foreign body or The overload system (latch- mechanisms for the adapter clogging of the up) for discs is activated too of floor conveyor. - Page 22 Operating Manual TYTAN premium Lubrication point Oil filler Oil level Lubricate every 10 h of work Lubricate every 100 h of work Lubricate every quarter Fig. 14 Lubrication scheme. - p. 21 -...
-
Page 23: Maintenance And Lubrication
Operating Manual TYTAN premium 7. Maintenance and lubrication. Lubrication of the spreader must be carried out in accordance with Fig. 14 of the lubrication table. Lubricators heads must be carefully cleaned from mechanical contamination before using grease. There are sight-glasses installed on mechanical gearboxes, serving for control of the oil level. In case of deficiency pour oil to reach half of the sight-glass. -
Page 24: Disassembly And Withdrawal From Use
Operating Manual TYTAN premium 8. Dismantling and withdrawal from use 1. The machine should be dismantled by at least 2 persons. Before starting the work they should read and understand the Operating Manual. 2. The dismantling post should be equipped with a lifting device (overhead crane, crane or a hoist with lifting capacity of 500 kg). -
Page 25: Manure Spreading Standard
Standards for the manure spreader depending on feed rate and speed of travel Manure type – straw - Vertical adapter Volumetric weight [t/m3] – 0.6 Working width [m] - 6 Travel speed [km/h] Setting No Delivery [kg/s] Spreading standard [t/ha] 2.40 1.11 0.89... - Page 26 Standards for the manure spreader depending on feed rate and speed of travel Manure type – medium-rottened- Vertical adapter Volumetric weight [t/m3] – 1.0 Working width [m] - 6 Travel speed [km/h] Setting No Delivery [kg/s] Spreading standard [t/ha] 4.00 1.85 1.48 1.23...
- Page 27 Standards for the manure spreader depending on feed rate and speed of travel Manure type – rottened - Vertical adapter Volumetric weight [t/m3] – 1.2 Working width [m] - 6 Travel speed [km/h] Setting No Delivery [kg/s] Spreading standard [t/ha] 4.80 2.22 1.78...
- Page 28 Standards for lime spreading depending on the feed rate of the spreader and speed of travel Lime type – magnesium lime - Disc adapter Volumetric weight [t/m3] – 1.4 Working width [m] - 11 Travel speed [km/h] Setting No Delivery [kg/s] Spreading standard [t/ha] 5.60 1.41...
- Page 29 Operating Manual TYTAN premium - p. 28 -...
Need help?
Do you have a question about the TYTAN premium 13 and is the answer not in the manual?
Questions and answers