Air For Combustion And Ventilation - Desa HDCFTP Owner's Operation And Installation Manual

ASSEMBLY
Continued
Assembling Hood
1. Locate four black phillips sheet metal screws
from the hardware packet.
2. Rotate hood as shown in Figure 4. Make sure
hood tabs point toward fireplace.
3. Insert hood tabs between baffle and louvers
(see Figure 4).
4. Gently rotate hood to upright position. Make
sure hood tabs are behind louvers and hood
is resting on firebox top (see Figure 4).
5. Align screw holes on hood with screw holes
on firebox top.
6. Insert screws as shown in Figure 4. Tighten
screws firmly.
Louver
Hood
Figure 4 - Assembling Hood
6
Hood Tab
Baffle
Firebox
Top
Sheet
Metal Hood
Screws Tabs
www.desatech.com 111044-01E