Zonet ZVC7610W User Manual page 22

- Wireless Mode: Select the type of wireless communication for ZVC7610W
Infrastructure
Ad-Hoc
- Channel: Select the appropriate wireless channel
- Authentication: Select an authentication method to secure ZVC7610W from being
used by unauthorized wireless users.
Open
Shared-key
WPA-PSK
WPA2-PSK
Open
Shared-key
WPA-PSK/
WPA2-PSK
The following settings must complete if you choose Open or Shared-key as the
Authentication mode.
Encryption: Select WEP option to enable data encryption feature to secure
ZVC7610W within the wireless network
Format: Select ASCII or HEX format for your encryption key according to the
wireless network setting.
Key Length: Select WEP key length according to the wireless network setting.
Hex 64 bits: 10 characters (use only 0~9 & A~F)
Hex 128 bits: 26 characters (use only 0~9 & A~F)
ASCII 64 bits: 5 alphanumeric characters
ASCII 128 bits: 13 alphanumeric characters
WEP Key 1/2/3/4: Enter the # of WEP key(s) in the following boxes. WEP Key #
must match with your wireless network setting.
The following settings must complete if you choose WPA-PSK or WPA2-PSK as the
Authentication mode.
Encryption: Select TKIP or AES.
TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000
packets to provide greater security than standard WEP setting.
Default setting of authentication mode.
It communicates the encryption key
across the wireless network.
Only allow communication with
wireless devices with identical
encryption settings.
WPA-PSK / WPA2-PSK are designed
for users who do not have network
access and must manually enter
password to their access
point/gateway and each computer
within the wireless network.
- -
21