Related Manuals for Markon SAWAFUJI BL105G
Summarization of Contents
Section 1: Introduction
1.1 BL105 Generator
Details the self-exciting brushless generator, its operation, and dual voltage output capabilities.
1.2 NL105 Generator
Explains the self-exciting rotating field design, excitation via choke/rectifier, and dual voltage output.
1.3 SL105 Generator
Describes the AVR-controlled generator, close regulation, and voltage adjustment capability.
1.4 TL105 Generator
Details the AVR-controlled three-phase generator for balanced/unbalanced loads.
1.5 CL105 Generator
Covers current compounded excitation control for refrigeration, and wide speed range operation.
Section 2: Application
2.1 Standards
Generator designed to comply with international standards and operate in 40°C ambient.
2.2 Airflow
Proper positioning for cooling air to prevent overheating and damage.
2.3 Direction of Rotation
Generator is suitable for rotation in either direction.
2.4 Drive Arrangement
Details engine drive shaft mounting and bearing arrangements for belt drive.
2.4.1 Road Vehicle Generators
Specific two-bearing arrangement for high loads and vibration in road vehicles.
2.5 Bearings
Preloaded, sealed-for-life bearings requiring minimal attention.
2.5.1 Road Vehicle Generators
Enhanced bearings for road vehicle applications, clamped drive end bearing.
2.6 Earthing
Generator is isolated from frame; earth terminal provided on bearing support.
2.7 Loading
Continuous load capacity and considerations for electric motor starting loads.
Section 3: Installation
3.1 Safety Warnings
Responsibility of the builder to fit safety labels for user visibility.
3.2 Inspection
Checking received equipment details, serial number, and removing packing materials.
3.3 Coupling to Engine
Refers to the Assembly/Dismantling Procedure section for engine coupling.
3.4 Electrical Connections
Details flying leads, connection options, overload protection, and earthing.
3.5 Voltage Selection
How to connect stator windings in series or parallel for dual voltage output.
3.6 Voltage Adjustment for the SL105 - AVR MD1C
Setting voltage via potentiometer on AVR and stability adjustments.
Section 4: Service & Maintenance
4.1 General
Maintenance requirements for different models, brush/slipring inspection, and general cleaning.
Need help?
Do you have a question about the SAWAFUJI BL105G and is the answer not in the manual?
Questions and answers