Table of Contents

Advertisement

Quick Links

Dry suit owner manual
EXPLORER NST
XPEDITION / XPEDITION SE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XPEDITION SE and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety
Important safety instructions
Crucial guidelines for using the drysuit safely and avoiding injury or death.
SCUBA FORCE Dry suits
Intended use and function of a drysuit
Describes the purpose and functionality of SCUBA FORCE laminate dry suits for diving.
Selection and adaptation of a dry suit
Guidance on choosing the correct size of SCUBA FORCE dry suits based on measurements.
Before dressing
Putting on the dry suit over the diving clothing
Instructions on how to wear the dry suit over diving clothes and perform fit checks.
Dry suit valves
Neck and arm cuffs
Describes the function and fit of watertight neck and arm cuffs.
Dry Boots & Slim Line Boots
Information about the boots included with the drysuit, designed to keep feet dry.
Waterproof Zipper
Details on the importance and care of the drysuit's waterproof zipper.
Further equipment
Suspenders
Function of suspenders to fix the crotch part and allow upper half wear.
Telescope torso
Area offering extra space for donning/doffing, folding when not needed.
Crotch strap
Secures the telescope torso area when the dry suit is in use.
Thermal collar
Collar used with thermal hood for neck protection and warmth.
Zipper cover
Protective cover for the waterproof zipper.
Accessories for dry diving
Diving clothes (cold protection)
SCUBA FORCE offers cold protection clothing specifically designed for diving.
Hood
Thermal Collar Hoods provide additional neck protection and fit all SCUBA FORCE dry suits.
Dry glove systems
Consideration for dry glove systems in water temperatures below 54°F (12°C) to prevent cold injury.
Cuffs
Latex cuffs
Describes latex neck and arm cuffs, including trimming for fit and seal.
Wear arm cuffs
Latex
Instructions for wearing latex arm cuffs correctly for a proper seal.
Neoprene cuffs (smooth cuff surface inside)
Steps for wearing neoprene arm cuffs with the smooth surface folded inwards for a seal.
Wear neck cuffs
Latex
Instructions for wearing latex neck cuffs to ensure a flat, wrinkle-free seal against the skin.
Neopren
Steps for wearing neoprene neck cuffs to achieve a proper seal against the neck.
Take off arm cuffs
Latex
Method for removing latex arm cuffs without damaging the suit or cuff.
Neopren (smooth cuff surface inside)
Steps for removing neoprene arm cuffs correctly.
Take off neck cuffs
Latex
Method for removing latex neck cuffs safely and easily.
Neopren
Steps for removing neoprene neck cuffs correctly.
Preparation
Connect the pressure hose of the drysuit to the regulator
Instructions for connecting the drysuit's LP hose to the regulator's LP outlet.
Before the first dive
Seals
Check the drysuit seals for stickiness, damage, or other issues before diving.
Zipper
Inspect and lubricate the drysuit zipper before diving for proper function.
Preparation
Entry into the water
Procedures for safely entering the water with a dry suit, avoiding excess air.
Establish neutral buoyancy on the surface
Steps to achieve neutral buoyancy on the surface before diving.
Emergency skills
Wrong position (air in the legs)
How to regain an upright position when upside down with air in the legs.
Taking off your SCUBA FORCE drysuit
Taking off a latex or neuprene neck seal
Instructions for removing latex or neoprene neck seals, referencing earlier sections.
Problem management
Waterproof zipper not fully closed.
Check the waterproof zipper is fully closed to prevent leaks.
The cuffs do not fit properly on the arms and / or neck.
Ensure proper cuff fit for sealing, checking for wrinkles or foreign objects.
Dirt or foreign object on the air outlet valve seal.
Clean the air outlet valve seal with fresh water if dirt is present.
Holes or tear in the material of the drysuit or cuff.
Visually inspect the drysuit and cuffs for holes or tears to identify leaks.
Care and handling of your SCUBA FORCE drysuit
The valves of the drysuit, like your regulator, must be cleaned after each use.
Valves require cleaning after each use to prevent blockage from salt, debris, or hair.
Wash the latex cuffs with a mild, soapy solution after every twelfth dive or before storing the drysuit.
Wash latex cuffs periodically to remove body fat buildup, which shortens their life.
Storage of your drysuit
Zusammenlegen Ihres SCUBA FORCE Trockentauchanzuges im Trockentauch-anzugs-Beutel für den Transport
Instructions for folding the SCUBA FORCE drysuit into its transport bag.
Hanging your drysuit for storage
Guidelines for hanging the drysuit for storage between dives.

Table of Contents