Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MORPHOR AP-1
Summary of Contents for MORPHOR AP-1
- Page 1 AP-1 Analogue Plectrum...
-
Page 2: Table Of Contents
Table of Contents Table of Contents Warranty Package Contents Safety Instructions Conformity Installation Introduction Controls & Connections Technical Specifications Support Module Revision History Manual Version /\/\ AP-1 - Analogue Plectrum Page of... -
Page 3: Warranty
Warranty THIS PRODUCT IS COVERED BY MORPHOR'S LIMITED WARRANTY, FOR TWO YEARS FOLLOWING THE DATE OF PURCHASE (PROOF OF PURCHASE/INVOICE REQUIRED). THIS WARRANTY COVERS ANY DEFECT IN THE MANUFACTURING OF THIS PRODUCT. THIS WARRANTY DOES NOT COVER ANY DAMAGE OR MALFUNCTION CAUSED BY INCORRECT USE - SUCH... -
Page 4: Package Contents
• An original Morphor brand sticker If any of the above items is missing, please contact your dealer or send an email to support@morphor.io. Safety Instructions Never use the instrument in a humid or wet environment, nor near flammable goods. The instrument must never be operated outdoors but solely in dry rooms. -
Page 5: Installation
The Morphor AP-1 uses the -12 V and the +12 V rail of the power supply (using a standard Eurorack 2x8 pin connector). The red stripe of the included ribbon cable (-12 V side) must be oriented on the same side as the “RED -12 V”... -
Page 6: Introduction
Introduction The Morphor Analogue Plectrum (AP-1) module is a high quality, fully analogue Eurorack module that can produce plucked string-like sounds. It is a compact all-in-one solution for generating amazing bass, acoustic guitar, percussion and other amazing sounds. The module is based on the Karplus-Strong principle with a true analog audio path built with an authentic bucket brigade delay (BBD) circuit which is recognizable by its specific timbre. -
Page 7: Controls & Connections
filter (LPF) in the Karplus-Strong loop, combined with any external signals that may be connected to Karplus-Strong loop IN OUTPUT [ 9 ] Your juicy analogue audio output signal at 10 V /\/\ AP-1 - Analogue Plectrum Page of... -
Page 8: Technical Specifications
In case your module is not functioning as it should, make sure to check your Eurorack power supply and all connections first. If the problem persists, contact your dealer or send an email to support@morphor.io. Please mention your serial number, which can be found on the module's rear side. - Page 9 Designed & made in Belgium Copyright © 2022 Morphor. All rights reserved.
Need help?
Do you have a question about the AP-1 and is the answer not in the manual?
Questions and answers