Related Manuals for New Holland Powerstar 110
Summarization of Contents
GENERAL INFORMATION
Note to the Owner
Information concerning adjustment and maintenance of the new machine.
Intended Use and Precautions
Guidance on the tractor's design, limitations, and essential safety precautions for operation.
Technical Specifications and Compliance
Details on EMC, metric/imperial units, identification plates, and SCR system.
Operator's Manual and Machine Storage
Guidance on manual storage and machine orientation.
SAFETY INFORMATION
General Safety Guidelines
Comprehensive safety guidelines covering operation, maintenance, and emergency situations.
Component-Specific Safety
Safety measures for specific components like PTO, seats, PPE, and front loader.
Operational and Emergency Safety
Safety protocols for tires, environment, recovery, and emergency exit procedures.
CONTROLS AND INSTRUMENTS
Operator Access and Seating
Procedures for accessing the operator platform and details on operator and instructional seats.
Control Systems Overview
Covers forward, left-hand, and right-hand side controls, including the instrument panel and HVAC.
Exterior and Display Controls
Details on exterior controls like hydraulic lift and trailer socket, and display functions.
OPERATING INSTRUCTIONS
Unit Commissioning and Startup
Procedures for commissioning, starting, and stopping the tractor unit.
Moving and Equipment Handling
Guidance on machine movement, loader, and bucket operations.
TRANSPORT OPERATIONS
Road Transport Procedures
Guidelines for safely transporting the machine via road.
Recovery and Towing
Procedures for recovering and towing the tractor.
WORKING OPERATIONS
General Working Operation
Basic information on engine speed, differential lock, and transmission operation.
Drive System Operations
Details on transmission operation for driving the tractor.
Hydraulic Systems and PTO
Information on rear remote control valves, PTO, and hydraulic lift operations.
Towing and Hitching Systems
Details on towbar, tread/fender settings, and three-point hitch operations.
MAINTENANCE
General Maintenance Information
Overview of emissions, general safety, service, and basic maintenance items.
Maintenance Planning and Requirements
Details on maintenance schedules, intervals, and specific checks.
Service Procedures by Interval
Specific maintenance tasks categorized by operating hours (daily, 50, 100, 300, 600, 1200 hours).
Long-Term Maintenance and Checks
Maintenance tasks for longer intervals (1200 hours/2 years, 2 years, 3600 hours/2 or 4 years).
Electrical System and Storage
Electrical System Checks and Replacements
Procedures for checking and replacing battery, lights, fuses, and relays.
Fuse and Relay Locations
Identification and checking procedures for fuses and relays.
Tractor Storage Procedures
Guidelines for storing the tractor and removing it from storage.
CALIBRATION AND TROUBLESHOOTING
Calibration Procedures
Steps for clutch calibration and electronic lift calibration.
Troubleshooting Fault Codes
Guidance on resolving fault codes and error identification.
Troubleshooting Alarms and Symptoms
Information on instrument cluster alarms and common system symptoms for troubleshooting.
SPECIFICATIONS
General Dimensions and Loads
Details on general dimensions and maximum permitted loads.
Speed Tables and Capacities
Information on speed tables for gearboxes, consumables, and capacities.
General and Front Loader Specifications
Overall general specifications and specific details for the front loader.
ACCESSORIES
Available Accessories
Information on accessories such as radio, ballast, and immersion heaters.
Need help?
Do you have a question about the Powerstar 110 and is the answer not in the manual?
Questions and answers