Biostar TA880GXE Setup Manual page 43

<Online Update>
(for AMI BIOS only)
Automatically download and update the latest BIOS via internet; make sure
that the computer is connected to the internet before using this function.
After clicking on the Onlinr Update
button, the utility will search for the
latest BIOS from internet. If there is
a new BIOS version, the utility will
ask you to download it. Click
proceed.
Download completes; the utility will
ask you to program (update) the
BIOS. Click to proceed.
Yes
The programing procedure may take minutes,
during the programing process.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
In the BIOS setup, use the
to exit BIOS setup. Online Update is completed.
Exit Setup
All the information and content above about the T-Series software are subject to be
changed without notice. For better performance, the software is being continuously
updated. The information and pictures described above are for your reference only.
The actual information and settings on board may be slightly different from this manual.
to
Yes
If there is no other newer BIOS
version, the utility will also tell you that
your BIOS has been the latest version.
please do not make any operation
After the updating process, the utility will
ask you to reboot the system. Click
to reboot.
Load Optimized Defaults
TA890GXE / TA880GXE
OK
<Delete>
function and then
Save and
41