Advertisement
Quick Links
Cloudray Laser
Laser Machine
Troubleshooting
Guide
THE PDF TROUBLESHOOTING GUIDES REPRESENT SOME OF THE MORE
COMMON QUESTIONS OR ISSUES THAT YOU MAY ENCOUNTER WITH
CLOUDRAY LASER. THE PDFS ARE LAID OUT IN A STEP-BY-STEP FASHION
WITH SUPPLEMENTARY LINKS TO RELEVANT BOSS YOUTUBE VIDEOS. IF
YOU THINK YOU NEED FURTHER HELP CONTACT US:
info@cloudray.com
Advertisement
Related Manuals for Cloudray LiteMarker MP-60
Summarization of Contents
Laser Engraving Machine Type
MP-60 LiteMarker 60W Split Laser Engraver Marking Machine
Details the MP-60 LiteMarker 60W Split with 800mm manual lifting tower and EZCAD2 software.
(Pro) MP Series-Auto Focus 60W Laser Engraver Marking Machine
Explains the (Pro) MP Series-Auto Focus 60W with 500mm electric lifting tower and EZCAD2/Lite software.
AR-60 60W Split Laser Engraver 2.5D Fiber Marking Machine
Covers the AR-60 60W Split with 500mm electric lifting tower and EZCAD3 for 2.5D engraving.
Installation and Driver Problems
Installation Short Circuit and Power Checks
Addresses short circuits during installation, focusing on power supply and wiring checks.
Driver Issues: Yellow Mark & Imc Device Error
Guides on resolving Device Manager yellow marks and 'Failed to open Imc device' errors via driver checks.
Error Code 52: Unsigned Driver Troubleshooting
Details how to fix 'Error Code 52' related to unsigned drivers, recommending restarts and video submission.
Software: Ezcad2/3 & Lightburn
Lightburn Compatibility and Connection Issues
Discusses Cloudray machine support for Lightburn, trial, and troubleshooting connection alarms.
Ezcad2 Common Troubleshooting Scenarios
Covers issues like 'cannot open correct file', straight lines, and setting double marking in Ezcad2.
Ezcad2 Dongle Detection & Image Inversion
Addresses Ezcad2 dongle detection failures and image/text inversion problems in fiber laser machines.
Ezcad3 File Format and License Errors
Provides solutions for Ezcad3's 'correct file format error' and 'software licenses invalid' prompts.
Red Light Settings
Red Light Preview and Contour Issues
Addresses lost red light preview outlines and the absence of red light contours.
Red Light Pointer Configuration
Details how to configure the red light pointer settings for optimal use.
Red Light Functionality and Troubleshooting
Covers explanations of red light points, disappearance, and laser stoppage issues.
F-theta Lens
Focus Lens Adjustment and Marking Size
Guides on changing focus lenses, setting focal distance, and resolving marking size mismatches.
Unwanted Galvo Movement Troubleshooting
Addresses sporadic galvo movement, suggesting power supply checks and video recording.
Foot Switch
Foot Switch Connection and Configuration
Explains how to connect and configure the foot switch for the laser marking board using F3 parameters.
Foot Switch Response and Damage Troubleshooting
Covers troubleshooting machine response issues after foot switch changes and detecting damage.
Need help?
Do you have a question about the LiteMarker MP-60 and is the answer not in the manual?
Questions and answers