Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Echelon TP-10
Summarization of Contents
Electrical Interface
FT 5000 Connector Pinout
Details the JP1 connector pinout and signals for the FT 5000 module.
Neuron 3150 Connector Pinouts
Describes the P1 and P2 connector pinouts for the Neuron 3150 modules.
Reset and Service Pin Functions
Explains the functionality and usage of the reset and service pins.
Mechanical Considerations
FT 5000 Mechanical Details
Covers floorplan layout and mounting footprint for the FT 5000 module.
Neuron 3150 Mechanical Footprint
Details the mounting footprint and connector details for Neuron 3150 modules.
Power Requirements
FT 5000 Module Power
Details voltage and current requirements for the FT 5000 module.
Neuron 3150 Module Power
Details voltage and current requirements for the Neuron 3150 modules.
Network Cabling and Connection
Performance Characteristics
Summarizes module performance and cabling information.
Free Topology Cabling
Covers wire characteristics and terminations for TP/FT-10.
TP/XF Cabling and Topology Rules
Discusses wire, terminations, and topology rules for TP/XF modules.
Design Issues
EMI and EMC Design
Covers Electromagnetic Interference and EMC compliance tips.
PCB Layout for FT 5000
Provides PC board layout recommendations for the FT 5000 module.
Neuron 3150 Keepout Areas
Identifies critical areas on Neuron 3150 for EMI/ESD protection.
ESD Design and Immunity
Discusses Electrostatic Discharge effects and protection techniques.
Interoperability Guidelines
Covers requirements for LONWORKS interoperability.
Programming Considerations
External Memory and Programming
Covers external memory, programming methods, and clearing memory.
Flash Memory Devices
Lists flash memory part numbers for specific control modules.
Development Tools and Configuration
Details NodeBuilder FX, and configuration for FT 5000/Neuron 3150.
Development Kits
Introduces Mini FX and ShortStack kits for application development.
Need help?
Do you have a question about the TP-10 and is the answer not in the manual?
Questions and answers