Related Manuals for MEHEN MIX120
Summarization of Contents
General Information
Nameplate of Machine
Machine identification details, including manufacture date and serial number.
Machine Layout
Diagrams and dimensions of the machine's physical arrangement.
Technical Features
Key specifications like capacity, power, and consumption for various models.
Working Conditions
Environmental and operational parameters for optimal machine performance.
Installation
Position
Guidelines for selecting a stable and appropriate location for machine placement.
Installation of Air-cooled Machine
Setup instructions for air-cooled units, emphasizing ventilation requirements.
Installation of Water-cooled Machine
Procedures for installing water-cooled units, including water supply connection.
Electrical Connection
How to safely connect the machine to the power supply, including circuit protection.
Change Cable
Instructions for replacing a damaged power cable, specifying requirements.
Refrigerant Gas Refill
Information on refrigerant gas handling and refilling by qualified technicians.
Machine Testing
Steps to verify machine functions after installation, including beating and temperature cycles.
Configuration and Components Position
Components Position
Labeled diagram identifying the location of key machine components.
Feed Mix and Take Out Mix
Operational steps for loading ingredients and dispensing the final product.
Blending Parts
Detailed breakdown of the components within the blending assembly.
Discharge Valve
Explanation of the discharge valve's construction and operation.
Controls and Operation
Brief Introduce
Overview of the Touch-Screen-Controller (TSC) for operation and fault diagnosis.
Some Specified Concepts
Definitions of operational states like STANDBY MODE and ERROR MODE.
Electrical Control Panel
Identification of the user interface elements on the control panel.
Main Specification of Controller
Details on temperature detection, adjustment range, and accuracy.
Daily Operation
Step-by-step guide for routine daily machine operation and program selection.
Mixing
Instructions for initiating and controlling the mixing function independently.
User Parameter Regulation
How to adjust and customize machine parameters for specific needs.
Mix Processing Program
Guide to creating, setting, and managing custom processing programs.
Mix Tank Cover Open Alarm
Explanation of the alarm triggered by an open mix tank cover and its behavior.
Power Failure
Machine's response to power interruptions and its recovery process.
Error Alarm
How the machine signals and halts upon detecting operational errors.
Error Alarm Indication
Mapping of error messages to causes and troubleshooting solutions.
Printer (optional installed)
Details on the optional printer for logging operational data in real-time.
Electric Diagram
Reference to the machine's electrical schematic diagrams for technical analysis.
Safety Device
Safety Device Position
Identifies the locations of all safety mechanisms on the machine.
Anti-over-heated thermostat and probe
Describes the function and setpoint of the overheating protection thermostat.
Maintenance
Routine Maintenance
General procedures and precautions for everyday upkeep of the machine.
Maintenance of Water-cooled Machine
Specific maintenance for water-cooled models, including seasonal storage advice.
Maintenance of Air-cooled Machine
Cleaning instructions for air-cooled condensers to maintain efficiency.
Preventive Maintenance
Steps for proactive checks to ensure optimal performance before a new season.
Order Spare Parts
Guidance on obtaining replacement parts and components from MEHEN.
Need help?
Do you have a question about the MIX120 and is the answer not in the manual?
Questions and answers