Advertisement
High and Low Power
Microphone and
Optional Handset
Priority Channel
Base Unit, Microphone
and Optional Handset
Channel Select
Base Unit and
Microphone
Optional Handset
10
1
Press
or
H/L
(High) and LO (Low) (25W or 1W) transmission
power for the entire channel bank. A beep
sounds and the selection is shown on the LCD.
2
If HI power cannot be used with a particular
channel, the annunciator automatically goes to
LO power. If you press
error beep sounds.
Channel 16 and HI power are automatically selected
at power up.
1
If you're on a working channel and want to check
the priority channel for traffic, just press
or
.
16/9
2
Press again to recall your working channel.
NOTE: On the 725US ONLY the priority channel can be
set to Channel 09. To set this, just hold down
until Channel 09 appears on the LCD.
The working channel is shown in BIG numbers on
the LCD of the base unit.
To step through the channels one at a time, press CH
or CH
to display each channel.
To change channels rapidly, hold down CH
to scroll through the channels.
You can also use the rotary knob to select a channel.
The working channel is shown in BIG numbers on
the LCD of the optional handset.
To step through the channels one at a time, press
or
to display each channel.
To change channels rapidly, hold down
the optional handset to scroll through the channels.
Northstar Explorer 725/705 Quickstart Guide
to toggle between HI
H/L
IC
or
H/L
H/L
IC
H/L
H/L
again, an
IC
16
16
16/9
16/9
or CH
or
on
Advertisement
