Related Manuals for ARTEX 8700
Summarization of Contents
1. Introduction
1.1 Application
Describes the functions and uses of the Artex Handheld Programmer and its compatibility with ELT models.
1.2 Differences
Highlights the key distinctions between the Handheld Programmer and previous test sets.
2. Hardware
2.1 Overview
Provides a general description of the Handheld Programmer's hardware components and connectivity.
2.2 Battery
Details battery specifications, warnings, storage, installation, and charging procedures for the device.
3. Palm™ Desktop Software
3.1 Hot Sync
Explains the process of installing and using the Palm Desktop software for data transfer and synchronization.
4. Artex Programming Software
4.1 Overview
Introduces the Artex software, its purpose for reading and programming Artex ELTs, and message handling.
4.5 ELT Programming
Provides detailed instructions and considerations for programming various Artex ELT models.
5. C406-N Series PA (Programming Adapter)
5.1 PA Hardware Operation
Describes the hardware setup and connection for programming the C406-N Series Programming Adapter.
5.1.1 With Cannon Plug Attached To PA
Details the procedure for programming the PA when the cannon plug is attached, including cable connections.
5.3 ELT 3000/ELT 4000 Series Programming Adapter
5.3.1 Programming the ELT 3000/ELT 4000 Programming Adapter
Explains how to program the accessory programming adapter for ELT 3000 and ELT 4000 series.
6. Programming Verification
6.1 ELT Testing Precautions
Outlines essential safety precautions and environmental requirements for ELT testing.
6.2 ELT Reader Function (Sarcalc)
Details how to use the Sarcalc software for reading and decoding ELT messages.
7. Label and Report Printing
7.1 Printers
Information on compatible printers and how to contact support for printer software.
7.2 Label Printing
Instructions for selecting printers and printing ELT data labels.
10. Specifications and Calibration
10.1 Meazura™ MEZ1500 Specifications
Lists the technical specifications for the base Meazura™ MEZ1500 unit.
10.2 Handheld Programmer Module Specifications
Provides technical specifications for the Handheld Programmer module itself.
10.3 Calibration
States that the Handheld Programmer is factory calibrated and requires no periodic recalibration.
11. Components and Optional Equipment
11.1 System Component Part Numbers
Lists the part numbers for components included in the Handheld Programmer kit.
11.2 Optional Equipment
Details optional parts that may be required for ELT attenuation or direct connection.
12. Troubleshooting
12.1 Trouble Shooting Guide
Provides a guide to common symptoms, likely causes, and actions for resolving issues.
12.2 Technical Assistance
Contact information and advice for obtaining further assistance with programming ELTs.
Need help?
Do you have a question about the 8700 and is the answer not in the manual?
Questions and answers