Advertisement
Quick Links
Advertisement
Related Manuals for PERMCO 360 Series
Summarization of Contents
Tool List and Kits
Bushing Removal
Details bushing removal process with dimensional specifications and required tooling.
Bushing Insertion
Details bushing insertion process with dimensional specifications and tooling.
Motor Seal Expansion Sleeve
Details specifications for the motor seal expansion sleeve.
Start Disassembly
Initial Disassembly Steps
Covers initial steps of pump disassembly including securing, fastener removal, and cover separation.
Component Removal and Inspection
Details removing internal components like bearings and seals, and inspecting bushings.
Single and Tandem Assembly
Assembly Preparation
Covers preparation steps like cleaning mating surfaces and deburring bores before assembly.
Component Installation and Housing
Details installing bushings, retaining rings, pins, and housing assembly steps.
Final Assembly and Gear Placement
Covers final assembly steps including thrust plate, gear placement, and bearing carrier installation.
Bushing Install
P124/M124 Bushing Installation
Illustrates bushing installation for P124/M124 series with specific orientation requirements.
P197/M197 Bushing Installation
Illustrates bushing installation for P197/M197 series with lube grooves and butt joints.
P257/M257 Bushing Installation
Illustrates bushing installation for P257/M257 series with lube grooves and butt joints.
P360/M360 Bushing Installation
Illustrates bushing installation for P360/M360 series with lube grooves and orientation.
Procedures and Notes
Startup and Break-in Procedure
Details the procedure for testing and breaking in the pump unit under various conditions.
Fluid Type and Temperature Conditions
Specifies compatible fluid types and recommended operating temperature ranges.
Need help?
Do you have a question about the 360 Series and is the answer not in the manual?
Questions and answers