Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for King Pigeon M160T
Summarization of Contents
Technical Specifications
Digital Input Specifications
Details input types, I/O modes, dry contact, and pulse counter frequency for digital inputs.
Digital Output Specifications
Describes digital output types, I/O modes, pulse output frequency, and protection.
Analog and RTD I/O Specifications
Covers analog input/output, RTD input resolution, range, and accuracy.
Power, Communication, and Environmental Specs
Details power requirements, LAN, Serial Port, physical, and environmental specifications.
Physical Layout and Installation Diagram
Physical Layout and LED Indicators
Illustrates the physical dimensions, layout, and LED indicators of the I/O module.
Interface and Connectivity Details
Covers general interface instructions, RTD/AI/AO, RS485 port specifications, and wiring.
DIN1 Pulse Count Mode Setup
Describes how to configure DIN1 for high-speed or low-speed pulse counting modes.
Settings and Operation
Initial Setup and Configuration
Guides users on initial device setup, connection, and software configuration.
Basic and Network Settings
Covers basic device parameters, network configuration, and IP acquisition options.
Slave and Register Management
Explains slave settings, RS485 configuration, and register mapping for data management.
System Log Analysis
Describes the system log function for analyzing device operation and troubleshooting.
Modbus Protocol
Modbus Register Address Introduction
Explains Modbus communication protocols and introduces register address mapping.
Modbus Operation Examples
Provides practical examples of reading and writing data using Modbus TCP/RTU commands for various functions.
Device Mapping Register Operations
Details reading and writing bit and 16-bit mapped addresses using Modbus protocols.
Need help?
Do you have a question about the M160T and is the answer not in the manual?
Questions and answers