ACRONIS BACKUP RECOVERY 10 SERVER FOR WINDOWS - COMMAND LINE Cli Reference Manual page 9

b) Archive name, when restoring or deleting files from ASZ. Can be obtained with asz_files.
If the vault option is specified the filename option is ignored.
password:[password]
a) Password for the archive, if the archive location is other than ASZ.
b) Password for the ASZ, if archive location is ASZ.
asz:[number of archive]
Addresses to the ASZ and selects the archive (a full backup with or without increments).
To get the archive number, use asz_content.
index:N
N = Number of the backup in an archive:

1 = basic full backup

2 = 1st increment... and so on

0 (default) = latest increment
Selects a backup in a sequence of incremental backups inside the archive.
To get a backup index from the ASZ, use asz_content.
include_pits:[pits numbers]
Specifies the backups (pits) to be included in the archive copy. To get the numbers of pits, use
pit_info. Separate multiple values with a comma, for example:
/include_pits:2,4,5
The "0" value means the last backup in the archive, for example:
/include_pits:0
If not specified the whole archive is selected.
net_user:[username]
Specify a user name for network drive access.
net_password:[password]
Specify a password for network drive access.
ftp_user:[username]
Specify a user name for access to an FTP server.
ftp_password:[password]
Specify a password for access to an FTP server.
Copyright © Acronis, Inc., 2000-2010 9