ACRONIS BACKUP RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - COMMAND LINE Cli Reference Manual page 41

after:[post-data capture command]
Enables to define the command to be automatically executed after data capture.
2.1.3.2 filebackup
include:[names]
Files and folders to be included in the backup (comma separated). For example:
--include:'/home/bot/ATIESsafe.iso,/home/bot/ATIW.iso'
exclude_names:[names]
Files and folders to be excluded from the backup (comma separated). For example:
--exclude_names:'/home/bot/ATIESsafe.iso,/home/bot/MyProject/Old'
exclude_masks:[masks]
Applies masks to select files to be excluded from the backup. Use the common Linux masking rules.
For example, to exclude all files with extension .sh, add *.sh. My???.sh will exclude all .sh files with
names consisting of five symbols and starting with "my".
exclude_system
Excludes all system files from the backup.
exclude_hidden
Excludes all hidden files from the backup.
In Linux, a file is considered hidden if the first symbol in the file name is a dot.
before:[pre-data capture command]
Enables to define the command to be automatically executed before data capture.
after:[post-data capture command]
Enables to define the command to be automatically executed after data capture.
progress:[on | off]
Shows/hides the progress information (percent completed). It is shown by default.
2.1.3.3 restore
harddisk:[disk number]
Specifies the hard disks to restore by numbers.
Copyright © Acronis, Inc., 2000-2010 41