Task Failure Handling; Additional Settings - ACRONIS BACKUP AND RECOVERY 10 SERVER FOR WINDOWS - UPDATE 3 User Manual

3.3.1.19

Task failure handling

This option is effective for Windows and Linux operating systems.
This option is not available when operating under the bootable media.
This option determines the program behavior when any of the backup plan's tasks fails.
The preset is not to restart a failed task.
The program will try to execute the failed task again if you select the Restart a failed task check box
and specify the number of attempts and the time interval between the attempts. The program stops
trying as soon as an attempt completes successfully OR the specified number of attempts is
performed, depending on which comes first.
If the task fails because of a mistake in the backup plan, you can edit the plan while the task is in the Idle state.
While the task is running, you have to stop it prior to editing the backup plan.
3.3.1.20

Additional settings

Specify the additional settings for the backup operation by selecting or clearing the following check
boxes.
Overwrite data on a tape without prompting for user confirmation
This option is effective only when backing up to a tape device.
The preset is: Disabled.
When starting backup to a non-empty tape in a locally attached tape device, the program will warn
that you are about to lose data on the tape. To disable this warning, select this check box.
Dismount media after backup has finished
This option is effective in Windows and Linux operating systems.
This option is effective when backing up to a removable media (CD, DVD, tape or floppy disk.)
The preset is: Disabled.
69 Copyright © Acronis, Inc., 2000-2010