Upgrading Acronis Backup Server To Acronis Backup & Recovery 10 Storage Node - ACRONIS Backup & Recovery 10 Advanced Server SBS Edition Installation Manual

Result:
•
The imported group tasks become the management server's backup policies and appear in the
Backup policies view.
•
(After you upgraded tasks on a machine and if you did not specify the -r parameter.) When a
machine to which a group task was originally applied registers on the management server, the
corresponding backup policy will become applied to that machine.
4.5. Upgrading Acronis Backup Server to Acronis Backup
& Recovery 10 Storage Node
You can install Acronis Backup & Recovery 10 Storage Node on the same machine as the Acronis
Backup Server, or on a different machine.
If you want to import the backup server's locations as the storage node's centralized vaults, you must
install the storage node on the same machine as the backup server.
Importing the backup server's locations as centralized vaults facilitates access to the Acronis True
Image Echo archives stored in them. No Acronis Backup & Recovery 10 archives can be created in
these vaults.
To install Acronis Backup & Recovery 10 Storage Node
1. Run the Acronis Backup & Recovery 10 setup file.
2. In the list of components to install, select the Storage Node check box.
3. To be able to import the backup server's locations, select the Upgrade Tool check box.
4. Follow the on-screen instructions.
To import the backup server's locations
1. On the machine where the storage node is installed, log on as a member of the Administrators
group.
2. Change the current folder to the folder where the upgrade tool is installed—by default:
C:\Program Files\Acronis\UpgradeTool
If Acronis Backup & Recovery 10 is installed in a folder other than the default folder, change the
path accordingly.
3. Run the following command:
cscript UpgradeTool.vbs BS
Result:
•
The backup server's backup locations are the storage node's centralized vaults.
•
If the storage node is registered on the management server, these centralized vaults will appear
on the management server in the Vaults view.
•
Each centralized vault is named according to the backup location's folder.
•
Each centralized vault displays all archives currently present in the corresponding backup
location.
28 Copyright © Acronis, Inc., 2000-2009