Support For Snmp - ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER SBS EDITION - UPDATE 3 User Manual

Hide thumbs Also See for BACKUP AND RECOVERY 10 ADVANCED SERVER SBS EDITION - UPDATE 3:
Table of Contents

Advertisement

6. Acronis Active Restore (p. 386) is not available when recovering from a tape.
Recovery from a locally attached tape device
Before creating a recovery task, insert or mount the tape containing the backup you need to recover.
When creating a recovery task, select the tape device from the list of available locations and then
select the backup. After recovery is started, you will be prompted for other tapes if the tapes are
needed for recovery.

2.10 Support for SNMP

SNMP objects
Acronis Backup & Recovery 10 provides the following Simple Network Management Protocol (SNMP)
objects to SNMP management applications:
Type of event
Object identifier (OID): 1.3.6.1.4.1.24769.100.200.1.0
Syntax: OctetString
The value may be "Information", "Warning", 'Error" and "Unknown". "Unknown" is sent only in
the test message.
Text description of the event
Object identifier (OID): 1.3.6.1.4.1.24769.100.200.2.0
Syntax: OctetString
The value contains the text description of the event (it looks identical to messages published by
Acronis Backup & Recovery 10 in its log).
Example of varbind values:
1.3.6.1.4.1.24769.100.200.1.0:Information
1.3.6.1.4.1.24769.100.200.2.0:I0064000B
Supported operations
Acronis Backup & Recovery 10 supports only TRAP operations. It is not possible to manage Acronis
Backup & Recovery 10 using GET- and SET- requests. This means that you need to use an SNMP Trap
receiver to receive TRAP-messages.
About the management information base (MIB)
The MIB file acronis-abr.mib is located in the Acronis Backup & Recovery 10 installation directory. By
default: %ProgramFiles%\Acronis\BackupAndRecovery in Windows and
/usr/lib/Acronis/BackupAndRecovery in Linux.
This file can be read by a MIB browser or a simple text editor such as Notepad or vi.
About the test message
When configuring SNMP notifications, you can send a test message to check if your settings are
correct.
The parameters of the test message are as follows:
Type of event
45
Copyright © Acronis, Inc., 2000-2010

Advertisement

Table of Contents
loading

This manual is also suitable for:

Backup & recovery 10 advanced server sbs edition

Table of Contents