Related Manuals for Gorlitz GO 2000
Summarization of Contents
General Safety Instructions
Equipment & Environment Safety
Covers safe operation practices, environmental considerations, and proper equipment knowledge.
Personal Safety & Procedures
Details on protective apparel, keeping bystanders away, and safe shutdown procedures.
Pressure & Operational Vigilance
Guidelines on pressure ratings, handling high pressure, and staying alert during operation.
Additional Safety Instructions
Gasoline Powered Safety
Safety precautions specific to gasoline engines, including fuel handling and exhaust fumes.
Electric Powered Safety
Safety advice concerning batteries, sulfuric acid, and handling electrical components.
Propane Powered Safety
Precautions for propane conversion, emphasizing safe tank valve usage and flammability.
Lubrication and Comparison
Lubrication Guidelines
Instructions for oiling and greasing moving parts, checking oil levels, and recommended oil types.
Model Comparison Overview
A chart comparing Gorlitz jetter models based on motor, pump, pressure, hose, and application.
Hose & Nozzle Selection
Guidance on choosing the appropriate hose and nozzle based on pressure, diameter, and application needs.
Spray Gun and Valves
Spray Gun Usage Advice
Recommendations for using the spray gun, including reducing pressure to avoid damage.
Pressure Relief Valve Operation
Procedure for releasing system pressure using the manual pressure relief valve on gasoline models.
Safety Valve Functionality
Details on the adjustable pop-off safety valve and thermal relief valve for pressure regulation.
Operational Components
Liquid Injector Functionality
How to use the liquid injector for adding cleaning solutions and safety warnings.
Pulsator Operation & Care
Understanding the pulsator's effect, proper activation, and avoiding pump damage.
Pressure Regulator Adjustment
Instructions on adjusting the pressure regulator for optimal performance and safety settings.
General Operating Instructions
Setup and Connection Steps
Detailed steps for connecting the garden hose, jetter hose, and nozzle before operation.
Motor/Engine Starting Procedures
Step-by-step guides for starting electric, gasoline (recoil/electric start), and propane models.
Jetting & Hose Negotiation
Techniques for operating the jetter, managing hose movement in pipes, and clearing blockages.
Jetter Shut-Down Procedures
Stopping Electric Models
Instructions for safely shutting down electric-powered water jetters.
Stopping Propane Models
Steps for safely stopping propane-powered water jetters, including closing the tank valve.
Stopping Gasoline Models
Procedures for safely shutting down gasoline-powered water jetters, including fuel valve closure.
Maintenance and Troubleshooting
Blockage Cleaning & Winter Prep
Methods for clearing grease/ice blockages and protecting the pump/hose from freezing.
General Maintenance Checks
Routine checks for lubrication, tire pressure, fittings, electrical connections, and GFCI testing.
Common Jetter Issues
Troubleshooting guide for symptoms like no water flow or low water flow, with possible causes and solutions.
Troubleshooting Common Issues
Low Pressure & Erratic Flow
Diagnosing and resolving issues related to low water pressure and erratic flow or pressure.
Motor & Electrical Problems
Troubleshooting electric motor overheating, circuit breaker trips, and failure to start.
Gasoline Engine Start Issues
Common causes and solutions for gasoline engines failing to start, such as fuel or spark plug issues.
Troubleshooting Leaks & Failures
Water & Oil Leak Diagnosis
Identifying and fixing leaks from the manifold, crankcase, and pump seals.
Pump Failure Troubleshooting
Addressing frequent or premature packing failures, scored plungers, and water temperature issues.
Pump Operation Issues
Resolving issues like running dry, excessive discharge pressure, and using abrasive fluids.
Model GO 1500A Parts List
Frame & Motor Components
List of parts for the frame, pullstick, stop, motor, and associated electrical components.
Pump & Valve Assemblies
Details on pump, pulsator valve, pressure regulator, and various valve assemblies.
Fittings & Hoses
Catalog of fittings, hoses, connectors, and adapters used in the GO 1500A model.
Model GO 2000 Parts List
Frame & Motor Components
Parts breakdown for the GO 2000 frame, motor, pump, and electrical connectors.
Reel & Valve Assemblies
List of components for the reel assembly, brake kit, pulsator, and check valves.
Fittings & Hoses
Catalog of fittings, hoses, pressure gauges, and filters for the GO 2000 model.
Model GO 3000 Parts List
Frame & Motor Components
Parts list for the GO 3000 frame, wheels, battery, motor, and pump.
Reel & Valve Assemblies
Components for the reel assembly, pulsator, thermal valve, and back flow check valve.
Fittings & Hoses
Catalog of fittings, hoses, pressure gauges, rubber boots, and connectors for the GO 3000.
Model GO 3500 Parts List
Frame & Motor Components
Parts breakdown for the GO 3500 frame, fuel tank, motor, muffler, and gear box.
Reel & Valve Assemblies
Components for the reel assembly, brake kit, pulsator valve, and back flow check valve.
Fittings & Hoses
Catalog of fittings, hoses, pressure gauges, rubber sleeves, and connectors for the GO 3500.
Terms and Conditions
Ordering & Pricing Info
Details on how to order, pricing validity, sales tax, and freight policies.
Merchandise Claims & Returns
Procedures for claiming discrepancies, returning goods, and obtaining seller consent.
Warranty & Liability
Information on the one-year warranty, exclusions, limitations of liability, and dispute resolution.
Need help?
Do you have a question about the GO 2000 and is the answer not in the manual?
Questions and answers