Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for CRAM-A-LOT VB-72-B
Summarization of Contents
Installation Guidelines
Floor Space Requirements
Specifies the necessary clear floor area for safe baler installation and operation.
Baler Positioning
Guidelines on where to place the baler for optimal access and safe operation.
Anchoring Procedures
Details the requirements for securely anchoring the baler to the mounting surface.
Electrical Installation
Outlines electrical connection requirements, including disconnect switch installation.
Grounding Instructions
Provides instructions for proper electrical grounding of the appliance.
Hydraulic System Setup
Instructions for installing the vented cap on the hydraulic tank before operation.
Baler Operation
Owner/Employer Responsibilities
Lists the duties of the owner/employer to ensure safe and compliant baler operation.
Operator/Employee Responsibilities
Outlines the duties of operators and employees working with the baler.
Safety Guidelines and Precautions
Key safety guidelines and precautions for operating the baler safely.
Safety Hazard Terminology
Explains hazard-related terminology used on safety decals (DANGER, WARNING, CAUTION).
Baler Control Locations
Identifies the location of various controls on the baler, such as the start switch and emergency stop.
Emergency Operating Procedures
Details the steps to take in case of an emergency during baler operation.
Standard Baler Operation Steps
Step-by-step instructions for the normal, everyday operation of the baler.
Making and Tying a Bale
Procedures for creating and securing a bale using the baler.
Tying Bale with Front Feed Wire Guide
Specific steps for tying bales with the optional front feed wire guide.
Bale Ejection Procedure
Instructions on how to safely remove a completed bale from the chamber.
Bale Tie Configuration Guide
Recommended tie slot configurations for different material types and baler models.
Maintenance
Lockout/Tagout Safety Procedures
Critical safety procedures for isolating hazardous energy before maintenance.
Presshead Chocking Method
Method for securing the presshead when entering the bale chamber for service.
Preventive Maintenance Schedule
A schedule of daily, monthly, and annual maintenance tasks for optimal performance.
Safety Decal Information
Information on safety decals, their importance, and how to order replacements.
Hydraulic Oil Level Check and Addition
Procedures for checking the hydraulic oil level and adding oil as needed.
Troubleshooting
Motor Will Not Start
Common issues and checks when the baler motor fails to start.
Motor Runs, Presshead Does Not Move
Solutions for when the motor runs but the presshead remains stationary.
Loading Door Issues
Troubleshooting steps for problems with the loading door not opening or closing properly.
Bale Tie Slot Obstruction
Guidance on issues preventing bale ties from being threaded through slots.
Bale Ejection Failure
Steps to resolve issues where the bale does not eject from the chamber.
Parts Diagrams
Chassis and Loading Door Components
Diagrams and part numbers for the baler's chassis and loading door components.
Bale Tie Components
Information on different types of bale ties and their applications.
Power Unit Components
Diagrams and part numbers for the baler's power unit assembly.
Hydraulic Tank and Operator Components
Diagrams and part numbers for hydraulic tank components and operators.
Control Panel Components
Diagrams and part numbers for the components within the baler's control panel.
Warranty Policy & Procedures
Warranty Term and Conditions
Details the duration, coverage, and limitations of the CRAM-A-LOT® product warranty.
Limited Warranty Coverage
Specifies what is covered and excluded under the limited warranty for parts and labor.
Warranty Exclusions
Lists components and systems explicitly not covered by the standard product warranty.
Product Return and Repair Policy
Outlines the procedure for returning products or parts for repair or credit.
Warranty Claim Notification Process
Explains the required steps for buyers to notify the seller of defects and initiate a warranty claim.
Optional Extended Warranty Information
Provides information on obtaining an optional extended warranty for the product.
Need help?
Do you have a question about the VB-72-B and is the answer not in the manual?
Questions and answers