Parameter Setting Method; Chapter 4 Fault Code - XSY AT3 Manual

4. Parameter setting procedure:
1. Press the programming key to enter into the programming state;
2. Use the arrow keys and shift key to find the parameters that
need to be modified;
3. Press function / save key to enter into the parameter;
4. Use the arrow keys and shift key to amend the parameter value;
5. Press the function / save key to store the parameter;
6. Press the programming key to exit the programming state.
Fault Code Display
Err 1
Err 2
Err 3
Err 4
Err 5
Err 6
Err 7
Err 8
Err 9

Chapter 4 Fault Code

Module protection
Undervoltage protection
Overvoltage protection
Driving Circuit Failures
Input at startup when electrified
Over current protection
Overtime
Excessive temperatures for radiator
External fault
Fault Code Description
18页