Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hynautic CL-B4
Summarization of Contents
Hydraulic Engine Controls Installation and Service
LIMITED WARRANTY POLICY TELEFLEX MORSE TRADEMARK PRODUCTS
Details the warranty policy for Teleflex Morse trademark products, covering defects and limitations.
System Overview and Installation Preparation
Preparation for Installation
Steps to prepare for installing the hydraulic engine control system, emphasizing cleanliness.
Component Installation
Guidelines for installing various components of the hydraulic engine control system.
Control Unit Installation Procedures
Throttle Slave Installation
Detailed instructions for installing the throttle slave unit for various systems.
ST-06 Installation Only
Specific installation steps for the ST-06 throttle slave.
ST-04 Installation Only
Specific installation steps for the ST-04 throttle slave.
Clutch Slave Installation
Instructions for mounting and connecting the clutch slave to the transmission.
Reservoir, Tubing, and System Filling/Bleeding
Reservoir Installation
Guidelines for installing the hydraulic fluid reservoir and charging valve.
R-13 Reservoir Installation
Specific installation requirements for the R-13 reservoir.
R-04 Reservoir Installation
Specific installation requirements for the R-04 reservoir.
MCV-04 Charging Valve Installation
Procedure for installing the MCV-04 charging valve.
Tubing Installation and Connection
Procedures for installing and connecting hydraulic tubing, including connector assembly.
Filling and Bleeding System
Steps for filling the system with fluid and bleeding air from the hydraulic lines.
Filling the System
Procedure for filling the hydraulic system with the correct fluid.
Bleeding the System at Slave
How to bleed air from the hydraulic system at the slave units.
System Operation, Maintenance, and Troubleshooting
Bleeding the System at Senders
Procedure for bleeding air from the hydraulic system at the sender units.
System Fluid
Details on the recommended hydraulic fluid and its properties.
Making the System Operational
Steps to make the hydraulic system operational, including synchronization.
Synchronizing the Controls
Procedure for synchronizing the throttle and clutch control systems.
Connecting Engine Controls
Instructions for connecting the throttle and clutch linkages to the slaves.
Operation
How to operate the throttle and clutch control systems.
Maintenance
Schedule and procedures for maintaining the hydraulic engine control system.
Troubleshooting
Common problems, their causes, and solutions for the hydraulic system.
Need help?
Do you have a question about the CL-B4 and is the answer not in the manual?
Questions and answers