Table of Contents
Advertisement
SPLIT-TYPE ROOM AIR CONDITIONER
Owner's Manual &
Installation Manual
ASF16-12H1A
ASF16-12H1B
ASF16-18H2A
ASF16-18H2B
IMPORTANT NOTE:
Read this manual carefully before installing
or operating your new air conditioning
unit. Make sure to save this manual for
future reference.
Please check the applicable models, technical
data, F-GAS(if any) and manufacturer information
from the "Owner's Manual - Product Fiche "
in the packaging of the outdoor unit.
(European Union products only)
(888) 487-1125, www.apoodr.com
Advertisement
Table of Contents
Related Manuals for ApooDr ASF16-12H1B
Summarization of Contents
Safety Precautions
Product Use Warnings
General and specific warnings for safe operation and potential hazards.
Safety Precautions
Cleaning and Maintenance Safety
Safety guidelines for cleaning and maintaining the unit.
Electrical Safety Warnings
Critical warnings for electrical work, connections, and grounding.
Product Installation Warnings
Fluorinated Gases Handling
Information on handling fluorinated gases and related procedures.
Safety Precautions
Refrigerant Usage Warnings (R32/R290)
Specific warnings for using R32 and R290 refrigerants.
Unit Specifications and Features
Indoor Unit Display Indicators
Explains symbols and codes shown on the indoor unit display.
Unit Specifications and Features
Operating Temperature Ranges
Recommended temperature limits for different operating modes.
Tips for Optimal Unit Performance
Advice to maximize efficiency and performance of the air conditioner.
Unit Specifications and Features
Additional Unit Features Overview
Details on features like Auto-Restart, Anti-mildew, Wireless Control, and Sleep Operation.
Unit Specifications and Features
Air Flow Angle Adjustment
How to set vertical and horizontal airflow directions.
Manual Unit Operation
Procedure for operating the unit without the remote control.
Care and Maintenance
Indoor Unit Cleaning Procedures
Step-by-step guide for cleaning the indoor unit.
Air Filter Cleaning Instructions
How to clean and maintain air filters for optimal performance.
Care and Maintenance
Filter Handling and Cleaning Cautions
Safety notes regarding filter removal and cleaning.
Troubleshooting Guide
Safety Precautions During Troubleshooting
Essential safety measures to follow when diagnosing issues.
Common Problems and Solutions
Identifies common issues, their causes, and recommended fixes.
Troubleshooting
Outdoor Unit Noises, Odors, and Fan Issues
Explains common sounds, smells, and fan malfunctions.
Unit Operation and Responsiveness Issues
Addresses erratic behavior, unresponsiveness, and error indicators.
Troubleshooting
Unit Not Operating or Frequent Cycling
Diagnoses for units failing to start or cycling on/off frequently.
Performance and Indicator Lamp Troubleshooting
Solutions for poor heating performance and flashing indicator lamps.
Accessories
List of Included Installation Accessories
Details the parts and accessories provided with the unit.
Indoor Unit Installation Summary
Location, Wall Hole, and Mounting Plate Steps
Overview of initial steps for indoor unit installation.
Piping, Wiring, Drain Hose, and Wrapping Steps
Summary of connecting internal components and routing them.
Mounting the Indoor Unit
Final steps for securely attaching the indoor unit to the wall plate.
Unit Parts Identification
Notes on Manual Illustrations
Disclaimer regarding the explanatory nature of diagrams.
Indoor Unit Installation Details
Pre-Installation Checks and Location Criteria
Essential checks and standards for selecting the indoor unit location.
Wall Hole and Mounting Plate Installation
Guidance on drilling the wall hole and attaching the mounting plate.
Indoor Unit Installation Details
Wall Hole Drilling and Mounting Plate Dimensions
Specifics on drilling the wall hole and dimensions for mounting plates.
Indoor Unit Installation Details
Refrigerant Piping Preparation and Drain Hose Connection
Instructions for preparing pipes and connecting the drain hose.
Indoor Unit Installation Details
Connecting Signal and Power Cables
Detailed steps for wiring the indoor unit to power and signal.
Indoor Unit Installation Details
Bundling and Wrapping Piping and Cables
Procedure for securing and insulating the bundled internal components.
Indoor Unit Installation Details
Final Indoor Unit Mounting Procedure
Steps for attaching the indoor unit to the mounted plate.
Outdoor Unit Installation
Location Selection and Weather Considerations
Criteria for choosing an outdoor location and adapting to weather.
Outdoor Unit Installation
Drain Joint Installation and Unit Anchoring
How to install the drain joint and secure the outdoor unit.
Outdoor Unit Installation
Unit Mounting Dimensions and Bracket Installation
Details on unit dimensions, mounting options, and bracket usage.
Outdoor Unit Installation
Outdoor Unit Signal and Power Cable Connection
Wiring instructions for the outdoor unit's power and signal connections.
Refrigerant Piping Connection
Pipe Length Effects, Cutting, and Deformation Warnings
Guidance on pipe length, proper cutting techniques, and avoiding damage.
Refrigerant Piping Connection
Removing Burrs and Flaring Pipe Ends
Steps for preparing pipe ends for connection.
Connecting Pipes and Minimum Bend Radius
How to connect pipes and the required minimum bend radius.
Refrigerant Piping Connection
Flare Nut Tightening and Torque Requirements
Specifications for tightening flare nuts and using torque wrenches.
Connecting Piping to Outdoor Unit Valves
Procedure for connecting pipes to the outdoor unit's service valves.
Air Evacuation
Preparations, Precautions, and Valve Handling
Steps before evacuation and safe handling of valves.
System Evacuation Procedure
Detailed steps for removing air and moisture from the refrigerant circuit.
Air Evacuation
Adding Refrigerant and Type Mixing Caution
How to add refrigerant and a warning against mixing types.
Electrical and Gas Leak Checks
Pre-Test Run Electrical Safety and Grounding
Verifying electrical safety and grounding before operation.
Test Run Electrical Leakage Check
Performing an electrical leakage test during the unit's run.
Gas Leak Detection Methods
Techniques for identifying refrigerant leaks using soap or detectors.
Test Run
Test Run Procedure and Pipe Connection Verification
Instructions for operational testing and re-checking pipe connections.
Low Ambient Temperature COOL Function Test
Method for testing the COOL function in cold environments.
Impedance Information
System Impedance Requirements for Specific Models
Information on electrical supply impedance for certain unit models.
Need help?
Do you have a question about the ASF16-12H1B and is the answer not in the manual?
Questions and answers