Setting Up Iscsi Manually: Using The Md Storage Manager - Dell PowerVault MD3260i Troubleshooting Manual

You can start MDCU in any of the following ways:
On Windows-based systems:
During MD Storage Manager installation from the DVD shipped with your storage array, select
-
the option to automatically start MDCU following reboot
or
Once you have installed the management software and utilities from the DVD, choose
-
Start>Programs>Dell>MD Storage Software>Modular Disk Configuration Utility.
On Linux-based systems:
Once you have installed the management software and utilities from the DVD, launch MDCU
-
or
Go to /opt/dell/mdstoragesoftware/mdconfigurationutility and run the executable
-
Whichever way you launch MDCU, the window shown in Figure 1 is displayed.
Figure 1. Dell MD Configuration Utility for iSCSI

Setting Up iSCSI Manually: Using the MD Storage Manager

To manually set up iSCSI communication between your host server and storage array, perform the
following steps:
 Launch MD Storage Manager
From the Setup tab, choose Manually Identify Host

Using the MD Storage Manager wizard, enter the host and management information for each iSCSI host
used.
6