Setting Round-Robin Load Balancing Policy On Esx/Esxi-Based Storage Arrays - Dell PowerVault MD3260i Administrator's Manual
Md series storage arrays
Hide thumbs
Also See for PowerVault MD3260i:
- Deployment manual (57 pages) ,
- Troubleshooting manual (20 pages) ,
- Cli manual (226 pages)
Table of Contents
Advertisement
Setting Round-Robin Load Balancing Policy On ESX/ESXi-Based
Storage Arrays
NOTE: Perform this procedure after you have enabled ALUA on VMware ESX/ESXi and verified if the host server is
using ALUA for the MD storage array. For more information, see
Verifying If Host Server Is Using ALUA For MD Storage
To set a round-robin load balancing policy on your ESX/ESXi-based host server:
1.
Do one of the following:
–
For ESX 4.x, run the following command:
# esxcli nmp satp setdefaultpsp –psp VMW_PSP_RR –satp VMW_SATP_ALUA
–
For ESX/ESXi 5.x, run the following command:
# esxcli storage nmp satp set --default-psp VMW_PSP_RR --satp
VMW_SATP_ALUA
2.
Reboot your ESX-based host server.
Enabling ALUA On VMware ESX/ESXi
Array.
and
129
Advertisement
Table of Contents
