Table of Contents
Advertisement
2004 FOX FORX Owner's Manual
F80RLT - F100RLT - F80X - F100X
TALAS R - TALAS RL - TALAS RLC
FLOAT 80R - FLOAT 80RL - FLOAT 80RLC
FLOAT 100R - FLOAT 100RL - FLOAT100RLC
Vanilla 100R - Vanilla 100RL - Vanilla 100RLC
Vanilla 125R - Vanilla 125RL - Vanilla 125RLC
FOX RACING SHOX
130 Hangar Way,
Watsonville, CA 95076
831.274.6500 FAX 831.768.9312
E-Mail: service@foxracingshox.com
Website: www.foxracingshox.com
1
Advertisement
Table of Contents
Related Manuals for FOX RACING SHOX TALAS RLC
Summarization of Contents
Introduction and Contact Information
Contact Information
How to contact FOX Racing Shox for support and inquiries.
Service and Warranty Information
Details on product service, warranty claims, and international service centers.
Warranty Policy and Exclusions
Warranty Terms and FAQs
Comprehensive warranty terms, general and specific exclusions, and FAQs.
Safety and Installation Procedures
Consumer Safety Guidelines
Essential consumer safety advice for riding and fork use.
Fork Installation Steps
Step-by-step instructions for properly installing the fork.
Fork Specifications and Maintenance
Tire Sizes and Brake Compatibility
Information on compatible tire sizes and recommended brake types.
Pre-Ride Maintenance Checks
Critical checks to perform before each ride to ensure safety and performance.
Service Intervals and Air Pump Usage
Recommended Service Intervals
Schedule for regular fork maintenance based on usage hours.
Using the FOX High-Pressure Air Pump
Instructions for operating the air pump to adjust fork pressure.
Bushing Wear and Dropout Inspection
Bushing Technology and Inspection
Explanation of bushing lubrication and procedures for checking wear.
Dropout Thickness Inspection
Procedure for measuring dropout thickness and when to replace the lower leg.
General Setup and Vanilla Fork Tuning
Fork Terminology
Definitions of key terms used to describe fork components and functions.
Setting Sag on Vanilla Forks
How to measure and set sag for optimal performance on Vanilla forks.
Spring Tuning for Vanilla Forks
Guidelines for selecting the correct spring rate based on rider weight and sag.
FLOAT Fork Setup and Tuning
Coil Spring Replacement
Instructions for replacing the coil spring in Vanilla forks.
Setting Sag on FLOAT Forks
How to measure and set sag for optimal performance on FLOAT forks.
Air Spring Tuning for FLOAT Forks
Guidelines for adjusting air pressure based on rider weight for FLOAT forks.
TALAS Air Spring System
TALAS Travel Adjustment Guidelines
How to change travel on the fly using the TALAS knob.
TALAS Set-up Guidelines
Steps for setting air pressure and sag on TALAS forks for optimal performance.
Damping Adjustment Guide
Rebound, Compression, and Lock-out Adjustments
How to adjust rebound, compression, and lockout for optimal ride control.
Blow-off and Bump Threshold Adjustments
Tuning blow-off and bump threshold for lockout performance.
F80X/F100X Damper Operation
Explains TerraLogic technology and inertia valve operation.
Changing Travel on FLOAT Forx
FLOAT Forx Travel Spacer Diagram
Visual guide for rearranging travel spacers on FLOAT Forx.
Changing Travel on Vanilla Forx
Vanilla Forx Travel Spacer Diagram
Visual guide for rearranging travel spacers on Vanilla Forx.
Vanilla Forx Oil Change
Removing Damper Knobs
Steps to remove adjustment knobs for accessing damper components.
Float Forx Oil Change
Float Forx Air Shaft Assembly Maintenance
Procedures for cleaning and maintaining the air shaft assembly.
Fork Seals and Foam Rings Maintenance
Cleaning and Lubricating Seals
Guide on inspecting, cleaning, and lubricating fork seals and foam rings.
Tuning Notes and Specifications
Manufacturer's Notes and Disclaimers
Final remarks on tuning and the manufacturer's right to change specifications.
Need help?
Do you have a question about the TALAS RLC and is the answer not in the manual?
Questions and answers