Dell PowerVault MD3060e Installation And Configuration Manual page 33

To verify that the storage array was successfully added to the driver list, run the following command:
#esxcli nmp satp listrules | grep DELL
For more information about network configuration for software iSCSI storage, refer to iSCSI SAN
Configuration Guide: Configuring iSCSI Initiators and Storage: Setting Up Software iSCSI Initiators:
Networking Configuration for Software iSCSI Storage in the VMware vSphere Online Library.
Connecting a Dell MD3600f-Series or MD Dense Fibre Channel Storage Array
If using a Dell MD3600f-series or MD Dense storage array with ESX/ESXi 4.x, run the following commands
before mapping any virtual disks from the fibre channel storage array to the host.
From the ESX/ESXi console, run the following command:
#esxcli nmp satp addrule -v DELL -M MD36xxf -s VMW_SATP_LSI
To verify that the storage array was successfully added to the driver list, run the following command:
#esxcli nmp satp listrules | grep DELL
Dell MD Storage Array vCenter Plug-in | 33