Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kenwood NX- 1200A
Summarization of Contents
Preparation and Initial Setup
Installing Battery Pack, Antenna, and Belt Clip
Instructions for attaching the battery pack, antenna, and belt clip to the transceiver.
Installing Speaker/Microphone Jacks Cap and Accessories
Procedures for fitting protective caps and connecting external audio accessories.
Transceiver Orientation and Controls
Buttons and Controls Overview
Identifies and explains the function of each button and control on the transceiver.
Display Indicators Explained
Explains the meaning of various icons and indicators shown on the transceiver display.
Basic Transceiver Operations
Power, Volume, and Channel Selection
How to switch power, adjust volume, and select zones/channels.
Transmitting and Receiving Calls
Procedures for making and receiving group, individual, and other types of calls.
Accessing and Managing Transceiver Functions
Function Mode and Menu Navigation
Guide to accessing functions via programmable buttons and the menu system.
Comprehensive Functions List
Detailed list of available functions and their access methods across models.
Overview of Key Transceiver Functions
Autodial, Backlight, and Battery Status
Using Autodial, controlling backlight, and checking battery status.
Broadcast, Button Lock, and Call Functions
Making broadcast calls, locking buttons, and managing call alerts/interruptions.
Channel Management Operations
Channel Entry, Recall, and Selection
Procedures for entering, recalling, and selecting specific channels.
Channel Navigation and Clear Function
Using buttons/selector for channel up/down, clearing data, and sending CW messages.
Digital Signaling and Direct Channel Access
5-Tone Signaling and Direct Channel Setup
Adjusting 5-tone numbers and setting up direct channel shortcuts.
Display Format and Direct Channel Selection
Changing display modes and selecting direct channels.
Device Configuration and Settings
Emergency Mode and Microphone Sensitivity
Entering emergency mode and adjusting external microphone sensitivity.
Speaker Output and Fixed Volume
Selecting speaker output and setting fixed volume levels for tones.
Initiating Individual and Group Calls
Group Call Functions
Making group calls, including those with short or status messages.
Individual Call Functions
Making individual calls, including those with short or status messages.
Advanced Transceiver Operations
Manual Site Hunt and Menu Access
Manually searching for repeaters and accessing the menu via a button.
Medium Transmit Power Control
Switching to medium output power for balanced transmission range.
Microphone Sensitivity and Type Settings
Internal Microphone Sensitivity
Adjusting the sensitivity level for the internal microphone.
External Microphone Type Configuration
Selecting and configuring compatible external microphone types.
Audio Monitoring and Signaling Features
Monitor and OST Functions
Disabling signaling to listen to all calls and switching preset tone/code pairs.
OST List and OVCM Modes
Accessing OST list and using Open Voice Channel Mode.
MDC-1200 Protocol Functions
Radio Check and Inhibit Commands
Verifying transceiver availability and remotely inhibiting operation.
Radio Uninhibit Command
Remotely restoring a previously inhibited transceiver's operation.
Audio and Scan Features
RX Audio Equalizer and Auto Gain Control
Adjusting received audio characteristics and automatic volume gain.
Scan Function and Log Data Saving
Starting/stopping scans and saving transceiver operation logs.
Scrambler and Encryption Features
Secure Transmission Activation
Activating scrambler or encryption for secure voice communications.
Scrambler Code and Encryption Key Selection
Choosing and setting the code/key for scrambler/encryption functions.
Message and Speaker Configuration
GPS Data and Short Message Transmission
Sending GPS location data and predefined short text messages.
External Speaker Type Selection
Selecting compatible external speaker types for optimal audio quality.
Squelch Adjustment and Stack List Management
Squelch Level and Off Functions
Adjusting squelch threshold and turning squelch off for weak signal reception.
Stack List Operations
Checking received call and message records stored in the transceiver.
Transmission Audio Settings
TX Audio Equalizer and Auto Gain Control
Adjusting transmission audio characteristics and microphone sensitivity.
Voice Operated Transmission (VOX) Operations
VOX Type and Operation Modes
Explains VOX and Semi-VOX for hands-free transmission and their differences.
VOX Gain Level Setting
Adjusting microphone sensitivity threshold for VOX activation.
Zone Management and Navigation
Zone Delete/Add Function
Including or omitting zones from the multi-zone scanning sequence.
Zone Selection and Navigation
Methods for selecting and navigating through available zones.
Keypad Operation Methods
None and Channel Entry via Keypad
Keypad behavior when idle and entering channel numbers directly.
OST List and Autodial Mode Entry
Accessing OST list and entering Autodial mode using keypad shortcuts.
Keypad Auto PTT and Call/Message Input
Using keypad for DTMF transmission and inputting call/message details.
Detailed Function Descriptions
Transceiver Password Management
Procedures for setting, entering, and confirming transceiver passwords for security.
Scan Operations and Settings
Scan Functionality and Temporary Lockout
Starting/stopping scans, temporary channel lockout, and indicator meanings.
Priority Scan and Scan Revert
How priority channels affect scans and configuring the revert channel.
DTMF Calls and Stun Code Functionality
Making DTMF Calls
Methods for making DTMF calls including manual dialing and store & send.
Stun Code Functionality
Disabling transceivers remotely using stun codes if lost or stolen.
Scrambler and Encryption Features
Secure Transmission Activation
Activating scrambler or encryption for secure voice communications.
Scrambler Code and Encryption Key Selection
Choosing and setting the code/key for scrambler/encryption functions.
Signaling Systems and Filtering
QT/DQT, OST, and RAN Signaling
Using tones, codes, and RANs to filter and manage channel access.
Color Code and Optional Signaling Types
Using DMR Color Codes and various optional signaling methods.
Paging and Messaging Functions
FleetSync Paging and Selcall
Using FleetSync for paging and initiating/receiving Selcalls.
Identification Codes and Status Messages
Understanding ID codes and sending/receiving status messages.
Voice Operated Transmission (VOX) Operations
VOX Type and Operation Modes
Explains VOX and Semi-VOX for hands-free transmission and their differences.
VOX Gain Level Setting
Adjusting microphone sensitivity threshold for VOX activation.
Background Operations and Indicators
Time-Out Timer and Battery Management
TOT function to prevent extended channel use and battery saving features.
Signal Strength Indicator
Displays received signal strength levels using icons.
Need help?
Do you have a question about the NX- 1200A and is the answer not in the manual?
Questions and answers