Page 1
User Manual of Villa Outdoor Camera (Ordinary / Standard / Luxury) Product features may be varied with actual product, please contact us for detail.
1. Appearance 1)ordinary type: ① Microphone ② LED lights ③ Camera ④ Speaker ⑤ Call button 2)standard type: ① Microphone ② Camera ③ LED lights ④IC/ID Reader ⑤ Call button ⑥ Speaker...
Digital camera, with stable and clear images with light compensation function in the night or in strong light All-digital design, support synchronously monitoring of multiple users. Full-duplex voice intercom, has equal effect with the ordinary telephone intercom. ...
services life LINUX platform architecture, with simple and stable system Standard Ethernet interface, suitable for the trend of digitalization and networking; with online upgrade services, the after-sale maintenance is simple and convenient; abundant interfaces, easy to expand; ...
4、Extended functions (optional installation function) elevator linkage: with intelligent judgment and direct-to-floor elevator linkage function;; 5、Performance index CMOS digital color camera Camera Resolution Minimum 0.2Lux (with the luminous compensation light) illumination light compensation white mode Power supply DC12V power static 2W; Max: 3W consumption networking RJ45...
System will automatically hang up in 30 seconds. When “owner message” is set to be “default message”, if no one answered the call, system will automatically turn to message leaving state of villa door machine in 35 seconds.
"bayonet" of rear cover to the embedded box to ensure the “bayonet” connected firmly. The installation height of the villa door machine is about 1.3 meters from the ground to the bottom of the machine. (Shown as below) Installation steps: 1.
Page 9
Note: put inlet trunking upward, put water outlet downward, the outer surface flush with the wall. The installation height of the villa door machine is about 1.3 meters from the ground to the bottom of the machine (shown below) Installation steps: 1.
Page 10
2. After opening outlet holes of the embedded box, put the embedded box into the mounting hole and fix it. 3. Properly connect the cable of door machine and test its function. 4. Aligned iron ears on both sides of the embedded box, top- down hang up the gate unit.
Page 11
1)Ordinary type: interfaces pin number pin name Application functions LOCK KEY one-button call indoor machine (J18) External RS485 interface (J15) 3(J17) C/485 interface LOCK_IN 1-14 100M network interface (J38) DC12-15V 5(J19) Power supply: DC 12-15V input,Current:2A VDD3.3V System debugging interface, users disable...
Page 12
interfaces Pin name Application functions number DC12-15V Power supply: DC 12-18V input, 1(J9) current: 2A CVBS IN2 2 external analog camera interface 2(J15) CVBS IN3 3(J38) 1-14 100M network interface VCC3.3 System debugging interface, users 4(J6) disable electric-control lock Panel and 5(J10)...
Unlock signal interface 、 (J10) VDD3.3V System debugging interface, users (J6) disable DC12-15V Power supply: DC 12-15V input, 3(J19) current: 2A 4 (J38) 1-14 100M network interface 5(J17) C/485 interface LOCK_IN External RS485 interface (J15) LOCK KEY one-button call indoor machine (J18) Failure analysis and troubleshooting If the system can not work properly, please check them one by one according to...
External unlock module is Check replace The user can not unlock wrong. unlocking module. 10、Packing list Ordinary/Standard/Luxury: Accessories Quantity Remarks Villa machine embedded box manual certification Note: the packing list may be increased or reduced according to customers’ requirements...
Need help?
Do you have a question about the Luxury and is the answer not in the manual?
Questions and answers