Oase BioStyle 50 Thermo Operating Instructions Manual

Oase BioStyle 50 Thermo Operating Instructions Manual

Compact power filter

Advertisement

BioStyle
20, 30, 30 Thermo, 50, 50 Thermo
Operating instructions
Notice d'emploi
Instrucciones de uso

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BioStyle 50 Thermo and is the answer not in the manual?

Questions and answers

Summary of Contents for Oase BioStyle 50 Thermo

  • Page 1 BioStyle 20, 30, 30 Thermo, 50, 50 Thermo Operating instructions Notice d'emploi Instrucciones de uso...
  • Page 2 Do not use the unit, if electrical lines or the housing are damaged. A damaged connection cable cannot be replaced. Dispose of the unit. Do not carry or pull the unit by its power cable. Should problems occur, please contact the authorized customer service or OASE. SAVE THESE INSTRUCTIONS...
  • Page 3 DANGER To avoid possible electric shock, special care should be taken since water is employed in the use of aquarium equipment. For each of the following situations, do not at- tempt repairs by yourself, return the unit to an authorized service facility for service or discard the unit.
  • Page 4: Table Of Contents

    Contents Product description ..........................5 Overview .............................. 5 Symbols on the unit ........................6 Intended use ............................6 Questions, problems, missing parts? ..................... 6 Installation .............................. 7 Prepare filter cartridge ........................7 Attach filter ............................7 Commissioning/start-up ........................8 Maintenance and cleaning ....................... 9 Replace filter media ........................
  • Page 5: Product Description

    BSE0016 Maintenance indicator, shows when you have to change or clean the filter media Ventilation openings Filter cartridge (BioStyle 20: 1×, BioStyle 30: 2×, BioStyle 50: 3×) Flow regulator, adjusting the amount of water flowing through the filter Pump Heater, only available with the "Thermo" version...
  • Page 6: Symbols On The Unit

    Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances. Do not use for commercial or industrial purposes. Never run the unit without water. Questions, problems, missing parts? Before returning to your retailer, call us at 1-866-627-3435, EST, Monday-Friday, or email us at customercare@oase.com.
  • Page 7: Installation

    Installation Prepare filter cartridge Thoroughly rinse all filter materials with cold water before the first use. Do not open the Multi-stage filter cartridges. Attach filter How to proceed: 1. Place the filter on the aquarium rim so that the filter hangs vertically on the side of aquarium.
  • Page 8: Commissioning/Start-Up

    Commissioning/start-up NOTE BioStyle 30 Thermo, 50 Thermo: Fire hazard due to highly flammable material on hot surface. Only switch on the heater when it is completely submerged in water. If there is air in the telescopic intake, it may take up to 3 minutes for the pump to deliver water.
  • Page 9: Maintenance And Cleaning

    Maintenance and cleaning WARNING Serious injury or death from electric shock is possible. Disconnect all electrical devices in the water from the power supply before reach- ing into the water. Disconnect the device from the power supply before starting work on the unit. NOTE Do not use aggressive cleaning agents or chemical solutions.
  • Page 10: Cleaning The Filter Housing

    Cleaning the filter housing CAUTION Risk of burns from hot surface. Turn the heater off and let it cool down before removing it from the water. NOTE Fire hazard due to highly flammable material on hot surface. Turn the heater off and let it cool down before removing it from the water. Do not leave the heater unattended after removing it from the water.
  • Page 11: Cleaning/Replacing The Impeller Unit

    Cleaning/replacing the impeller unit Unplug the filter unit. Remove the filter unit from the aquarium. Drain the filter housing completely before removing the pump. BSE0006...
  • Page 12: Remove / Install Heater

    Remove / install heater You can remove or install the heater to Retrofit your filter with a heater, Thoroughly clean the filter housing, Replace a defective heater. Prerequisite: The pump is removed. BSE0008 Troubleshooting Malfunction Possible cause Remedy Pump does not start up Insufficient power Check the power supply cord...
  • Page 13: Technical Data

    Technical data BioStyle Thermo Thermo Rated voltage AC V Mains frequency Power consumption Protection class – IPX4 IPX4 IPX4 IPX4 IPX4 Length of connection cable Max. delivery rate Rated voltage AC V – – – Mains frequency – – – Max.
  • Page 14: Wear Parts

    Wear parts The following components are wear parts and are excluded from the warranty. Filter media Impeller unit Disposal NOTE Do not dispose of this unit with household waste. Contact your local waste disposal company for instructions on proper disposal of the unit.
  • Page 16 OASE North America Inc. 1-866-627-3435 customercare@oase.com www.oase-livingwater.com...

Table of Contents