Page 1
POWER CONVERTER USER MANUAL FUTURE | GHOST 01.06.2021...
Page 2
Marine Tech accepts no liability for damages and/or injuries caused by improper use of the Seacraft scooter as well as a result of its use in a manner contrary to or deviating from principles set out in this manual.
able of conTenTs Table of contents 1. Introduction 2. General Safety Rules 3. Using the power converter 3.1. General 3.2. Connecting and controlling an external device 3.3. Troubleshooting...
INTRODUCTION 1. INTRODUCTION CONGRATULATIONS! By choosing the optional Seacraft power converter for your scooter, you will benefit from additional flexibility and power for your external devices, as 12V light systems (as Seacraft SLS2),12V heating systems, or other compatible devices. In the following sections, all aspects of the optional Seacraft power converter will be explained.
Page 6
INTRODUCTION 1-4 | Seacraft Power Converter v1.0...
UleS 2. General Safety Rules Please note, that the Seacraft power converter was developed as a comfort add-on to your Seacraft scooter. Please treat it as such and observe the following: Caution! Only use compatible external devices (6-12 V, max. 140 W / 12 A).
Page 8
UleS 2-2 | Seacraft Power Converter v1.0...
The Secraft power converter is an optional accessory, that may be ordered with any new Seacraft scooter model FUTURE or GHOST or retrofit to scooters from serial number 129 on. Retrofitting a scooter with the power converter requires that DPV is equipped with hermetic charging port.
(see next section). 3.2. Connecting and controlling an external device Proceed as follows, in order to connect and use an external device with your Seacraft scooter: 1. Select a device matching the technical specifications. This could be a drysuit heating system, a hand-held or fixed light (e. g. Seacraft SLS2).
Page 11
10. Press any of the triggers shortly, or wait 5s in order to return to the standard screen. If you would like to change the power output during the dive, simply carry out steps 7 to 9. Seacraft Power Converter v1.0 | 3-3...
8. Check, if the external device works with a different power source (e. g. battery tank). 9. Connect a different external device to the scooter, and check if it works. If non of the above steps is successful, please visit the Seacraft support website www.support.seacraft.eu Use the contact form, or create a service ticket, so we can help you to solve the problem.
Need help?
Do you have a question about the GHOST and is the answer not in the manual?
Questions and answers