Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for smith&nephew 460P
Summarization of Contents
Preface and Introduction
Preface
Provides information needed to operate and maintain the camera control units.
Introduction
Describes the Smith & Nephew 450P and 460P 3-CCD Camera Control Units.
Indications, Contraindications, Warnings, and Precautions
Indications for Use
Details the intended surgical applications for the camera control units.
Contraindications
Lists any conditions or situations where the device should not be used.
Warnings
Highlights critical safety information and potential hazards associated with device use.
Precautions
Provides necessary steps and considerations for safe operation and to prevent damage.
System Components
Unpacking and General Inspection
Explains how to unpack and inspect all system components for damage before use.
Front Panel Controls
Details the buttons and connectors on the front panel of the camera control units.
Rear Panel Controls
Describes the various ports and connectors found on the rear panel of the CCU.
Camera Head Controls
Explains the function of buttons located on the camera heads for operation.
Preoperative Setup
Prepare the Camera Head
Instructions for cleaning, disinfecting, and ensuring the camera head is ready for use.
Inspect System Components
Ensures optimal performance and safe operation by inspecting all equipment.
Light Source Verification
Verifies the light source is producing the correct amount of light for proper imaging.
Electrical Connections
Guidance on making safe and proper electrical connections for the equipment.
Cable Connectors
Illustrates and describes the types of video cable connectors used with the CCUs.
Connecting the Camera Head
Step-by-step instructions on how to connect the camera cable to the CCU.
Connecting Video Accessories
Tips and guidelines for connecting monitors, VCRs, and printers to the CCU.
Recommended System Configuration
IEC 60601-1-1 Compliant System Configuration
Details a system configuration that meets IEC 60601-1-1 safety standards.
Equipment Setups
Setup 1: 450P/460P Camera Control Units
Details the connection of CCU with a monitor for basic video output.
Setup 2: 450P/460P Camera Control Units
Describes connecting CCU, S-VHS VCR, and monitor for recording and playback.
Setup 3: 450P/460P Camera Control Units
Explains the setup for CCU, VPR, and two monitors for expanded display options.
Setup 4: 460P Camera Control Units
Details connecting 460P CCU with VPR, monitors, and Flat Panel Display via SDI.
Setup 5: 460P Camera Control Units
Describes connecting 460P CCU with VPR, monitors, and Flat Panel Display via DVI.
Operation
Turning the Camera On
Step-by-step guide to powering up the camera control unit and checking connections.
Adjusting the Monitor to Color Bars
Procedure for calibrating monitor display using color bars for optimal image quality.
Tips for Adjusting Color Monitors
Provides advice on optimizing monitor settings for accurate color reproduction.
Confirm Coupler/Videoendoscope Attachment
Ensures proper connection of the videoscope or coupler to the camera head.
White Setting the Camera
Explains the procedure for adjusting camera color balance using a white object.
Camera Control Menus
Menus and Sub-Menus Overview
Introduces the OSD menu structure and front panel/camera head button operations.
Zoom Functionality (460P CCU)
Details how to use the digital zoom feature on the 460P model.
White Set Menu Operation
Describes the on-screen prompt and process for performing a white set.
Power-Up Initialization Sequence
Explains the startup screen and initial display behavior of the CCU.
Enhancement Function
Explains how to sharpen or soften image detail for better visualization.
Brightness Adjustment
Details how to adjust the video output luminance using the BRIGHTNESS controls.
Procedure Menu Options
Covers factory presets and custom settings for different surgical procedures.
Button Setup Menu
Allows configuration of camera head buttons for shortcuts or OSD navigation.
Language Selection
Enables selection of the display language for the OSD Menu.
Program Menu Settings
Allows adjustment of camera parameters and customization of surgical procedures.
Sensitivity Settings
Explains the SENSE UP function for progressive scan heads and LOW LIGHT options.
Black Set Function
Notes that Black Set is for factory use only.
Custom Procedure Settings
Describes programming and storing custom surgical procedure settings.
Color Adjustment Menu
Allows adjustment of Hue and Saturation for individual colors.
Dynamic Range Settings
Explains how to adjust parameters like GAMMA, AUTO KNEE, and PRE-KNEE.
Flexible Scope Filter
Describes filters to optimize image for fiberscopes and reduce Moire patterns.
Cleaning and Sterilization
Cleaning the Camera Control Unit
Instructions for cleaning the CCU casing, emphasizing safety precautions.
Cleaning Camera Heads
Refers to separate instructions for cleaning and sterilizing camera heads.
Cleaning the Fan Grill
Describes how to clean the fan grill for optimal unit performance.
Service and Maintenance
Service Philosophy
States that only authorized personnel should perform repairs or adjustments.
Changing Fuses
Provides instructions on how to safely replace blown fuses in the CCU.
Maintenance Recommendations
Recommends annual safety tests like dielectric strength and leakage current.
Electrical Interference
Provides measures to correct interference with other electrical equipment.
Environmental Protection
Advises on proper disposal of electronic components at the end of their useful life.
Troubleshooting
No Picture on Monitor
Lists common causes and solutions for a blank monitor screen.
Camera Power Switch Issues
Addresses problems with the power switch not illuminating, including fuse checks.
Image Color and Brightness Problems
Covers solutions for incorrect color, dark, bright, or grainy images.
Image Clarity Issues
Provides troubleshooting steps for cloudy, hazy, or intermittent video signals.
IEEE-1394 Data Reception Issues
Addresses problems with receiving data via IEEE-1394 connection.
Specifications
Equipment Classification and Resolution
Details safety classifications, resolution capabilities, and signal-to-noise ratio.
Shutter and Scanning System
Specifies shutter speeds and scanning system formats (NTSC/PAL).
Video Output Interfaces
Describes RGB, Y/C, IEEE-1394, Serial Digital Interface, and Digital Visual Interface outputs.
Performance and Power Requirements
Lists minimum illumination, AC leakage, power, operating temperature, and dimensions.
Ordering Information
NTSC Camera Control Units
Lists part numbers and descriptions for NTSC camera control units.
PAL Camera Control Units
Lists part numbers and descriptions for PAL camera control units.
System Accessories
Details available accessories for the camera control units.
Compatible Camera Heads
Lists compatible NTSC and PAL camera heads with their part numbers.
Electromagnetic Immunity Guidance
RF Emissions and Separation Distances
Provides guidance on RF emissions and recommended separation distances from transmitters.
Electrostatic Discharge and Transients
Details immunity levels for ESD and electrical fast transient/bursts.
Power Supply Variations Immunity
Covers immunity to voltage dips, interruptions, and power frequency magnetic fields.
Electromagnetic Emissions Guidance
RF and Harmonic Emissions
Specifies RF emissions class and harmonic/flicker emission compliance.
Warranty and Service Information
Warranty
Details the limited warranty for defects in material and workmanship.
Service Replacement Program
Describes the 24-hour service replacement program to minimize downtime.
Need help?
Do you have a question about the 460P and is the answer not in the manual?
Questions and answers